4-(2-噻吩)丁酸

  • 基本信息
  • 制备方法及用途
  • 物化性质
  • 安全信息
  • 毒理性
  • MSDS
  • 海关数据
  • 结构与计算化学
  • 上游产品
  • 下游产品
  • 表征图谱

4-(2-噻吩)丁酸 基本信息

中文名称:
4-(2-噻吩)丁酸 
中文别名:
4-(2-噻吩基)丁酸;
2-噻吩丁酸;
4-(2-噻吩)丁酸 
英文名称:
2-Thiophenebutanoicacid
英文别名:
4-(2-thienyl)butyric acid;
4-(2-Thienyl)butyric acid;
4-thiophen-2-ylbutanoic acid;
4-(Thiophen-2-yl)butanoic acid 
CAS No.:
4653-11-6
分 子 式:
C8H10O2S
分 子 量:
170.23
精确分子量:
170.04000
PSA:
65.54000
MDL:
MFCD00005463
EINECS:
225-090-0
BRN:
127982
InChI:
InChI=1/C8H10O2S/c9-8(10)5-1-3-7-4-2-6-11-7/h2,4,6H,1,3,5H2,(H,9,10)/p-1
危险品标志:
Xi
风险术语:
R36/37/38
安全术语:
S24/25;
分子结构式:
SDS:
查看

4-(2-噻吩)丁酸 制备方法及用途

用途

医药中间体

4-(2-噻吩)丁酸 物化性质

外观与性状:
透明略褐色液体
密度:
1.169 g/mL at 25 °C(lit.)
沸点:
122°C 0,3mm
闪点:
>230 °F
折射率:
n20/D 1.532(lit.)
存储条件/存储方法:

 避光,通风干燥处,密封保存

稳定性相关:

常温常压下稳定

其它信息:

1.       性状:无色液体

2.       度(g/mL25 ºC):1.169

3.       相对蒸汽密度(g/mL,空气=1):不确定

4.       熔点(ºC):不确定

5.       沸点(ºC,常压):不确定

6.       沸点(ºC,0.3mmHg):122

7.       折射率:1.532

8.       闪点(ºF):>230

9.       比旋光度(ºC=1, H2O):不确定

10.    燃点(ºC):>110

11.    蒸气压(kPa,25ºC):不确定

12.    饱和蒸气压(kPa,60ºC):不确定

13.    燃烧热(KJ/mol):不确定

14.    临界温度(ºC):不确定

15.    临界压力(KPa):不确定

16.    油水(辛醇/水)分配系数的对数值:不确定

17.    爆炸上限(%,V/V):不确定

18.    爆炸下限(%,V/V):不确定

19.    溶解性:不确定

4-(2-噻吩)丁酸 安全信息

海关代码:
2934999090
WGK_Germany:
3
德国有关水污染物质的分类清单
危险类别码:
R36/37/38
安全说明:
S26-S37/39
安全标志:
S26:万一接触眼睛,立即使用大量清水冲洗并送医诊治。
:
危险标志:
Xi

4-(2-噻吩)丁酸 毒理性

毒理学数据:

主要的刺激性影响

在皮肤上面:刺激皮肤和粘膜

   在眼睛上面:刺激的影响

   致敏作用:没有已知的敏化影响

生态数据:

通常对水是不危害的,若无政府许可,勿将材料排入周围环境

4-(2-噻吩)丁酸 MSDS

Name: 4-(2-Thienyl)butyric Acid 98% Material Safety Data Sheet
Synonym: 2-Thiophenebutyric Acid
CAS: 4653-11-6
Section 1 - Chemical Product   MSDS Name:4-(2-Thienyl)butyric Acid 98% Material Safety Data Sheet
Synonym:2-Thiophenebutyric Acid

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
4653-11-6 4-(2-Thienyl)butyric Acid 98% 225-090-0
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

Section 3 - HAZARDS IDENTIFICATION
  EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully investigated.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated.
Chronic:
No information found.

Section 4 - FIRST AID MEASURES
  Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:

Section 5 - FIRE FIGHTING MEASURES
  General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Containers may explode in the heat of a fire. Vapors may be heavier than air.
They can spread along the ground and collect in low or confined areas. Runoff from fire control or dilution water may cause pollution.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Use agent most appropriate to extinguish fire.

Section 6 - ACCIDENTAL RELEASE MEASURES
  General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, observing precautions in the Protective Equipment section. Provide ventilation.

Section 7 - HANDLING and STORAGE
  Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation.
Storage:
Keep container closed when not in use. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
  Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use process enclosure, local exhaust ventilation, or other engineering controls to control airborne levels.
Exposure Limits CAS# 4653-11-6: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
 
Physical State: Liquid
Color: clear slight brown
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: > 112 deg C (> 233.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.1690g/cm3
Molecular Formula: C8H10O2S
Molecular Weight: 170.23

Section 10 - STABILITY AND REACTIVITY
  Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, excess heat, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, sulfur oxides (SOx), including sulfur oxide and sulfur dioxide.
Hazardous Polymerization: Has not been reported

Section 11 - TOXICOLOGICAL INFORMATION
  RTECS#:
CAS# 4653-11-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
4-(2-Thienyl)butyric Acid - Not listed by ACGIH, IARC, or NTP.

Section 12 - ECOLOGICAL INFORMATION
 

Section 13 - DISPOSAL CONSIDERATIONS
  Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION
 
IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

Section 15 - REGULATORY INFORMATION
 
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 4653-11-6: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 4653-11-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 4653-11-6 is not listed on the TSCA inventory.
It is for research and development use only.


SECTION 16 - ADDITIONAL INFORMATION
N/A

4-(2-噻吩)丁酸 海关数据

中国海关编码:2934999090

概述:
2934999090. 其他杂环化合物. 增值税率:17.0%. 退税率:13.0%. 监管条件:无. 最惠国关税:6.5%. 普通关税:20.0%
申报要素:
品名, 成分含量, 用途
摘要/Summary:
2934999090. other heterocyclic compounds. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:20.0%

4-(2-噻吩)丁酸 分子结构与计算化学数据

分子结构数据

1、   摩尔折射率:45.01

2、   摩尔体积(m3/mol):139.3

3、   等张比容(90.2K):368.3

4、   表面张力(dyne/cm):48.8

5、   极化率10-24cm3):17.84

计算化学数据

1、   疏水参数计算参考值(XlogP):1.8

2、   氢键供体数量:1

3、   氢键受体数量:2

4、   可旋转化学键数量:4

5、   拓扑分子极性表面积(TPSA):37.3

6、   重原子数量:11

7、   表面电荷:0

8、   复杂度:136

9、   同位素原子数量:0

10、   确定原子立构中心数量:0

11、   不确定原子立构中心数量:0

12、   确定化学键立构中心数量:0

13、   不确定化学键立构中心数量:0

14、   共价键单元数量:1

推荐供应商更多供应商>>

湖北信康医药化工有限公司

产品介绍:
产品名称:4-2-噻吩丁酸 Cas号:4653-11-6 纯度:99% 包装信息:25kg纸板桶/编织袋/塑料桶 价格:25.0元
联系方式:
联系人:张欢 电话:027-59308705 手机:18827031272

湖北鑫红利化工有限公司

产品介绍:
产品名称:4-(2-噻吩基)丁酸 Cas号:4653-11-6 纯度:99% 包装信息:1t吨袋,200kg镀锌铁桶/塑料桶,25kg纸板桶/编织袋/塑料桶,10kg铝听/纸箱,1kg铝箔袋/氟化瓶 价格:1.0元 - 1,000.0元
联系方式:
联系人:周女士 电话:027-59503710 手机:18871490254

湖北万得化工有限公司

产品介绍:
产品名称:4-(2-噻吩基)丁酸 Cas号:4653-11-6 纯度:99% 包装信息:10kg 价格:洽谈
联系方式:
联系人:王念 电话:027-59210159 手机:15172311821

湖北鑫鸣泰化学有限公司

产品介绍:
产品名称:4-2-噻吩丁酸 Cas号:4653-11-6 纯度:99% 包装信息:100kg,200kg 价格:1.0元 - 1.0元
联系方式:
联系人:黄 电话:027-50662354 手机:13264726139

湖北巨胜科技有限公司

产品介绍:
产品名称:4-(2-噻吩基)丁酸 Cas号:4653-11-6 纯度:99% 包装信息:10kg 价格:洽谈
联系方式:
联系人:孙敏 电话:027-59599240 手机:18702754003

湖北摆渡化学有限公司

产品介绍:
产品名称:4-(2-噻吩基)丁酸 Cas号:4653-11-6 纯度:99% 包装信息:10kg 价格:洽谈
联系方式:
联系人:邹经理 电话:027-59223020 手机:18871490324

湖北实顺生物科技有限公司

产品介绍:
产品名称:4-(2-噻吩基)丁酸 Cas号:4653-11-6 纯度:99% 包装信息:10kg 价格:洽谈
联系方式:
联系人:张经理 电话:027-59223025 手机:15172526927

湖北永阔科技有限公司

产品介绍:
产品名称:4-(2-噻吩基)丁酸 Cas号:4653-11-6 纯度:99% 包装信息:10kg 价格:洽谈
联系方式:
联系人:徐 电话:027-59223108 手机:15107166787

天门恒昌化工有限公司

产品介绍:
产品名称:4-(2-噻吩基)丁酸 Cas号:4653-11-6 纯度:99% 包装信息:10kg 价格:洽谈
联系方式:
联系人:黄经理 电话:027-59322316 手机:15827039378

湖北广奥生物科技有限公司

产品介绍:
产品名称:4-(2-噻吩基)丁酸 Cas号:4653-11-6 纯度:99% 包装信息:10kg 价格:洽谈
联系方式:
联系人:孙经理 电话:027-59223056 手机:15271829679