三异丁基氯硅烷

  • 基本信息
  • 物化性质
  • 安全信息
  • 毒理性
  • MSDS
  • 海关数据
  • 结构与计算化学

三异丁基氯硅烷 基本信息

中文名称:
三异丁基氯硅烷 
中文别名:
三异丁基氯硅烷;
Triisopropyl Chloro Silane;
Triisopropylsilyl Chloride;
SILANE IP3;
TIPSCI;
TIPSC;
tris-Isopropylchlorosilane;
Triisopropylsilyl Cloride;
Triisopropylchlorosilane (TIPSCl);
Chlorotriisopropylsilane, Wacker Quality;
triisopropylchlorosilane;
Triisopropylchlorosilane, Redistilled;
Triisoprpylchlorosilane;
Silane, Chlorotris(1-Methylethyl)-;
Chloro(Tripropan-2-Yl)Silane;
Trimethylsilyl Trifluoromethane Sulphonate;
(17beta)-3-oxoandrosta-1 
英文名称:
Silane,chlorotris(2-methylpropyl)-
英文别名:
chloro-tris(2-methylpropyl)silane;
Triisobutylsilyl chloride;
Silane,chlorotris(2-methylpropyl);
Triisobutylchlorosilane Triisobutylsilyl chloride;
Chlor-triisobutyl-silan;
chlorotriisobutyl silane;
triisobutylchlorosilane 
CAS No.:
13154-25-1
分 子 式:
C12H27ClSi
分 子 量:
234.88
精确分子量:
234.15700
PSA:
0.00000
MDL:
MFCD00010658
EINECS:
454-150-0
InChI:
InChI=1/C12H27ClSi/c1-10(2)7-14(13,8-11(3)4)9-12(5)6/h10-12H,7-9H2,1-6H3
风险术语:
R34
安全术语:
S36/S37/S39
分子结构式:
SDS:
查看

三异丁基氯硅烷 物化性质

密度:
0.854g/cm3
沸点:
252.9ºC at 760mmHg
闪点:
87.8ºC
折射率:
n20/D 1.448(lit.)
蒸汽压:
0.0301mmHg at 25°C
其它信息:

1.性状:不可用

2.密度(g/mL,25/4℃): 0.875

3.相对蒸汽密度(g/mL,空气=1):不可用

4.熔点(ºC):不可用

5.沸点(ºC,常压):不可用

6.沸点(ºC,5.2kPa): 不可用

7.折射率: 1.448

8.闪点(ºC): 不可用

9.比旋光度(º): 不可用

10.自燃点或引燃温度(ºC): 不可用

11.蒸气压(kPa,25ºC): 不可用

12.饱和蒸气压(kPa,60ºC): 不可用

13.燃烧热(KJ/mol):不可用

14.临界温度(ºC): 不可用

15.临界压力(KPa): 不可用

16.油水(辛醇/水)分配系数的对数值:不可用 

17.爆炸上限(%,V/V):不可用

18.爆炸下限(%,V/V): 不可用

19.溶解性:不可用

三异丁基氯硅烷 安全信息

包装等级:
II
海关代码:
2931900090
危险类别码:
R34
安全说明:
S26
安全标志:
:
危险标志:
C: Corrosive;

三异丁基氯硅烷 毒理性

毒理学数据:

急性毒性:不可用 。

生态数据:

1、其它有害作用:该物质对环境可能有危害,对水体应给予特别注意。

三异丁基氯硅烷 MSDS


Section 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE
  Product identifiers
    Product name        : Chlorotriisobutylsilane    
    CAS-No.        : 13154-25-1    
  

Section 2. HAZARDS IDENTIFICATION
  Classification of the substance or mixture
  Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
    Skin corrosion (Category 1B)
  Classification according to EU Directives 67/548/EEC or 1999/45/EC
    Causes burns.
  Label elements
  Labelling according Regulation (EC) No 1272/2008 [CLP]
    Pictogram
    Signal word        Danger    
    Hazard statement(s)
    Causes severe skin burns and eye damage.
    Precautionary statement(s)
    Wear protective gloves/ protective clothing/ eye protection/ face
    protection.
    P305 + P351 + P338        IF IN EYES: Rinse cautiously with water for several minutes. Remove    
    contact lenses, if present and easy to do. Continue rinsing.
    Immediately call a POISON CENTER or doctor/ physician.
    Supplemental Hazard        none    
    Statements
  According to European Directive 67/548/EEC as amended.
    Hazard symbol(s)
    R-phrase(s)
    R34        Causes burns.    
    S-phrase(s)
    S26        In case of contact with eyes, rinse immediately with plenty of water and    
    seek medical advice.
    S36/37/39        Wear suitable protective clothing, gloves and eye/face protection.    
    S45        In case of accident or if you feel unwell, seek medical advice immediately    
    (show the label where possible).
  Other hazards - none

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
  Substances
    Synonyms        : Triisobutylchlorosilane    
    Triisobutylsilyl chloride
    Formula        : C12H27ClSi    
    Molecular Weight        : 234,88 g/mol    
    Component        Concentration    
  Chlorotriisobutylsilane
    CAS-No.        13154-25-1        -    
    EC-No.        454-150-0    

Section 4. FIRST AID MEASURES
  Description of first aid measures
  General advice
    Consult a physician. Show this safety data sheet to the doctor in attendance.
  If inhaled
    If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
  In case of skin contact
    Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Consult a
    physician.
  In case of eye contact
    Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
  If swallowed
    Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with
    water. Consult a physician.
  Most important symptoms and effects, both acute and delayed
    Material is extremely destructive to tissue of the mucous membranes and upper respiratory tract, eyes, and
    skin., spasm, inflammation and edema of the larynx, spasm, inflammation and edema of the bronchi,
    pneumonitis, pulmonary edema, burning sensation, Cough, wheezing, laryngitis, Shortness of breath,
    Headache, Nausea
  Indication of any immediate medical attention and special treatment needed
    no data available

Section 5. FIREFIGHTING MEASURES
  Extinguishing media
  Suitable extinguishing media
    For small (incipient) fires, use media such as "alcohol" foam, dry chemical, or carbon dioxide. For large
    fires, apply water from as far as possible. Use very large quantities (flooding) of water applied as a mist or
    spray; solid streams of water may be ineffective. Cool all affected containers with flooding quantities of
    water.
  Special hazards arising from the substance or mixture
    Carbon oxides, Hydrogen chloride gas, silicon oxides
  Advice for firefighters
    Wear self contained breathing apparatus for fire fighting if necessary.
  Further information
    Use water spray to cool unopened containers.

Section 6. ACCIDENTAL RELEASE MEASURES
  Personal precautions, protective equipment and emergency procedures
    Use personal protective equipment. Avoid breathing vapors, mist or gas. Ensure adequate ventilation.
    Remove all sources of ignition. Evacuate personnel to safe areas. Beware of vapours accumulating to
    form explosive concentrations. Vapours can accumulate in low areas.
  Environmental precautions
    Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
  Methods and materials for containment and cleaning up
    Contain spillage, and then collect with an electrically protected vacuum cleaner or by wet-brushing and
    place in container for disposal according to local regulations (see section 13). Keep in suitable, closed
    containers for disposal.
  Reference to other sections
    For disposal see section 13.

Section 7. HANDLING AND STORAGE
  Precautions for safe handling
    Avoid inhalation of vapour or mist.
    Keep away from sources of ignition - No smoking.Take measures to prevent the build up of electrostatic
    charge.
  Conditions for safe storage, including any incompatibilities
    Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are
    opened must be carefully resealed and kept upright to prevent leakage.
    Moisture sensitive.
  Specific end use(s)
    no data available

Section 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
  Control parameters
  Components with workplace control parameters
  Exposure controls
  Appropriate engineering controls
    Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
    at the end of workday.
  Personal protective equipment
  Eye/face protection
    Tightly fitting safety goggles. Faceshield (8-inch minimum). Use equipment for eye protection
    tested and approved under appropriate government standards such as NIOSH (US) or EN
    166(EU).
  Skin protection
    Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
    (without touching glove's outer surface) to avoid skin contact with this product. Dispose of
    contaminated gloves after use in accordance with applicable laws and good laboratory practices.
    Wash and dry hands.
    The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
    the standard EN 374 derived from it.
  Body Protection
    Complete suit protecting against chemicals, The type of protective equipment must be selected
    according to the concentration and amount of the dangerous substance at the specific workplace.
  Respiratory protection
    Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator
    with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup
    to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air
    respirator. Use respirators and components tested and approved under appropriate government
    standards such as NIOSH (US) or CEN (EU).

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
  Information on basic physical and chemical properties
    a) Appearance        Form: clear, liquid    
    Colour: colourless
    b) Odour        no data available    
    c) Odour Threshold        no data available    
    d) pH        no data available    
    e) Melting point/freezing        no data available    
    point
    f) Initial boiling point and no data available
    boiling range
    g) Flash point        87 °C - closed cup    
    h) Evaporation rate        no data available    
    i) Flammability (solid, gas) no data available
    j) Upper/lower        no data available    
    flammability or
    explosive limits
    k) Vapour pressure        no data available    
    l) Vapour density        no data available    
    m) Relative density        0,875 g/cm3 at 25 °C    
    n) Water solubility        no data available    
    o) Partition coefficient: n- no data available
    octanol/water
    p) Auto-ignition        no data available    
    temperature
    q) Decomposition        no data available    
    temperature
    r) Viscosity        no data available    
    s) Explosive properties        no data available    
    t) Oxidizing properties        no data available    
  Other safety information
    no data available

Section 10. STABILITY AND REACTIVITY
  Reactivity
    no data available
  Chemical stability
    no data available
  Possibility of hazardous reactions
    no data available
  Conditions to avoid
    Heat, flames and sparks.
  Incompatible materials
    Strong oxidizing agents
  Hazardous decomposition products
    Other decomposition products - no data available

Section 11. TOXICOLOGICAL INFORMATION
  Information on toxicological effects
  Acute toxicity
    no data available
  Skin corrosion/irritation
    no data available
  Serious eye damage/eye irritation
    no data available
  Respiratory or skin sensitization
    no data available
  Germ cell mutagenicity
    no data available
  Carcinogenicity
    IARC:        No component of this product present at levels greater than or equal to 0.1% is identified as    
    probable, possible or confirmed human carcinogen by IARC.
  Reproductive toxicity
    no data available
  Specific target organ toxicity - single exposure
    no data available
  Specific target organ toxicity - repeated exposure
    no data available
  Aspiration hazard
    no data available
  Potential health effects
  Inhalation        May be harmful if inhaled. Material is extremely destructive to the tissue of    
    the mucous membranes and upper respiratory tract.
  Ingestion        May be harmful if swallowed. Causes burns.    
  Skin        May be harmful if absorbed through skin. Causes skin burns.    
  Eyes        Causes eye burns.    
  Signs and Symptoms of Exposure
    Material is extremely destructive to tissue of the mucous membranes and upper respiratory tract, eyes, and
    skin., spasm, inflammation and edema of the larynx, spasm, inflammation and edema of the bronchi,
    pneumonitis, pulmonary edema, burning sensation, Cough, wheezing, laryngitis, Shortness of breath,
    Headache, Nausea
  Additional Information
    RTECS: Not available

Section 12. ECOLOGICAL INFORMATION
  Toxicity
    no data available
  Persistence and degradability
    no data available
  Bioaccumulative potential
    no data available
  Mobility in soil
    no data available
  Results of PBT and vPvB assessment
    no data available
  Other adverse effects
    no data available

Section 13. DISPOSAL CONSIDERATIONS
  Waste treatment methods
  Product
    This combustible material may be burned in a chemical incinerator equipped with an afterburner and
    scrubber. Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed
    professional waste disposal service to dispose of this material.
  Contaminated packaging
    Dispose of as unused product.

Section 14. TRANSPORT INFORMATION
  UN number
    ADR/RID: 2987        IMDG: 2987        IATA: 2987    
  UN proper shipping name
    ADR/RID: CHLOROSILANES, CORROSIVE, N.O.S.
    IMDG: CHLOROSILANES, CORROSIVE, N.O.S.
    IATA:        Chlorosilanes, corrosive, n.o.s.    
    Passenger Aircraft: Not permitted for transport
  Transport hazard class(es)
    ADR/RID: 8        IMDG: 8        IATA: 8    
  Packaging group
    ADR/RID: II        IMDG: II        IATA: II    
  Environmental hazards
    ADR/RID: no        IMDG Marine Pollutant: no        IATA: no    
  Special precautions for user
    no data available

Section 15. REGULATORY INFORMATION
    This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
  Safety, health and environmental regulations/legislation specific for the substance or mixture
    no data available
  Chemical Safety Assessment


SECTION 16 - ADDITIONAL INFORMATION
N/A

三异丁基氯硅烷 海关数据

中国海关编码:2931900090

概述:
2931900090. 其他有机-无机化合物. 增值税率:17.0%. 退税率:13.0%. 监管条件:AB(入境货物通关单,出境货物通关单). 最惠国关税:6.5%. 普通关税:30.0%
摘要/Summary:
2931900090. other organo-inorganic compounds. VAT:17.0%. Tax rebate rate:13.0%. Supervision conditions:AB(certificate of inspection for goods inward,certificate of inspection for goods outward). MFN tariff:6.5%. General tariff:30.0%

三异丁基氯硅烷 分子结构与计算化学数据

分子结构数据

1、摩尔折射率:71.08

2、摩尔体积(cm3/mol):274.8

3、等张比容(90.2K):599.3

4、表面张力(dyne/cm):22.6

5、极化率(10-24cm3):28.18

计算化学数据

1.疏水参数计算参考值(XlogP):无

2.氢键供体数量:0

3.氢键受体数量:0

4.可旋转化学键数量:6

5.互变异构体数量:无

6.拓扑分子极性表面积0

7.重原子数量:14

8.表面电荷:0

9.复杂度:126

10.同位素原子数量:0

11.确定原子立构中心数量:0

12.不确定原子立构中心数量:0

13.确定化学键立构中心数量:0

14.不确定化学键立构中心数量:0

15.共价键单元数量:1

推荐供应商更多供应商>>

湖北诺纳科技有限公司

产品介绍:
产品名称:三异丁基氯硅烷 Cas号:13154-25-1 纯度:99% 包装信息:1kg铝箔袋/氟化瓶,10kg铝听/纸箱,25kg纸板桶/编织袋/塑料桶 价格:1.0元 - 25.0元
联系方式:
联系人:张经理 电话:027-59209883 手机:17386169806

湖北云镁科技有限公司

产品介绍:
产品名称:三异丁基氯硅烷 Cas号:13154-25-1 纯度:99% 包装信息:153kg,25kg纸板桶/编织袋/塑料桶,10kg铝听/纸箱,1kg铝箔袋/氟化瓶 价格:1.0元 - 153.0元
联系方式:
联系人:方经理 电话:027-59206672 手机:18327059871

上海吉至生化科技有限公司

产品介绍:
产品名称:chloro-tris(2-methylpropyl)silane Cas号:13154-25-1 纯度:96% 包装信息:10gea 价格:1,498.0元
联系方式:
联系人:江珊 电话:021-57520831 手机:15316869680

湖北恩星生物科技有限公司

产品介绍:
产品名称:三异丁基氯硅烷 Cas号:13154-25-1 纯度: 包装信息:100kg,200kg,300kg,400kg,500kg 价格:64.0元 - 100.0元
联系方式:
联系人:邵经理 电话:16621771607 手机:16621771607

湖北臻博化工有限公司

产品介绍:
产品名称:三异丁基氯硅烷 Cas号:13154-25-1 纯度:98% 包装信息:200kg,25kg,1kg 价格:洽谈
联系方式:
联系人:张经理 电话:18071535998 手机:18071535998

湖北实兴化工有限公司

产品介绍:
产品名称:三异丁基氯硅烷 Cas号:13154-25-1 纯度:99% 包装信息:1kg,25kg,50kg,200kg,500kg 价格:1.0元 - 10.0元
联系方式:
联系人:张妍 电话:13554155445 手机:13554155445

西格玛奥德里奇

产品介绍:
产品名称:三异丁基氯硅烷 Cas号:13154-25-1 纯度:99% 包装信息:g-kg 价格:洽谈
联系方式:
联系人:默克 电话:021-61514946 手机:

郑州杰克斯化工有限公司

产品介绍:
产品名称:三异丁基氯硅烷 Cas号:13154-25-1 纯度: 包装信息:洽谈 价格:洽谈
联系方式:
联系人:许伟伟 电话:0371-86259281 15981966935 手机:15981966935