5-羧戊基三苯基溴化膦

  • 基本信息
  • 制备方法及用途
  • 物化性质
  • 安全信息
  • 毒理性
  • MSDS
  • 结构与计算化学
  • 下游产品

5-羧戊基三苯基溴化膦 基本信息

中文名称:
5-羧戊基三苯基溴化膦 
中文别名:
(5-羧基戊基)三苯基溴化磷;
5-羧基戊基-三苯基溴化磷;
5-羧戊基三苯基溴化膦 
英文名称:
Phosphonium,(5-carboxypentyl)triphenyl-, bromide (1:1)
英文别名:
(5-Carboxypentyl)triphenylphosphonium bromide;
(5-Carboxypentyl)(triphenyl)phosphonium bromide 
CAS No.:
50889-29-7
分 子 式:
C24H26O2P.Br
分 子 量:
457.34
精确分子量:
456.08500
PSA:
50.89000
MDL:
MFCD00055556
BRN:
4649483
InChI:
InChI=1/C24H25O2P.BrH/c25-24(26)19-11-4-12-20-27(21-13-5-1-6-14-21,22-15-7-2-8-16-22)23-17-9-3-10-18-23;/h1-3,5-10,13-18H,4,11-12,19-20H2;1H
危险品标志:
风险术语:
R20/21/22;R36/37/38   
安全术语:
S22;S26;S36/37/39
分子结构式:
SDS:
查看

5-羧戊基三苯基溴化膦 制备方法及用途

制备方法

用作医药中间体、催化剂、歧化剂等

用途简介

用途

用作医药中间体、催化剂、歧化剂等

5-羧戊基三苯基溴化膦 物化性质

外观与性状:
白色结晶固体
熔点:
197-201 °C
存储条件/存储方法:

保持贮藏器密封、储存在阴凉、干燥的地方,确保工作间有良好的通风或排气装置

稳定性相关:

如果遵照规格使用和储存则不会分解,未有已知危险反应

 

其它信息:

1.       性状:粉末

2.       密度(g/mL,25ºC):未确定

3.       相对蒸汽密度(g/mL,空气=1): 未确定

4.       熔点(ºC):200-202

5.       沸点(ºC):未确定

6.       沸点(ºC0.15mm hg):未确定

7.       折射率:未确定

8.       闪点(°C):未确定

9.       比旋光度(ºC):未确定

10.    自燃点或引燃温度(ºC): 未确定

11.    蒸气压(kPa,20ºC):未确定

12.    饱和蒸气压(kPa,60ºC):未确定

13.    燃烧热(KJ/mol):未确定

14.    临界温度(ºC):未确定

15.    临界压力(KPa):未确定

16.    油水(辛醇/水)分配系数的对数值:未确定

17.    爆炸上限(%,V/V):未确定

18.    爆炸下限(%,V/V):未确定

19.    溶解性:未确定

5-羧戊基三苯基溴化膦 安全信息

WGK_Germany:
3
德国有关水污染物质的分类清单
危险类别码:
R20/21/22;R36/37/38
安全说明:
S26-S36-S36/37/39-S22
安全标志:
S26:万一接触眼睛,立即使用大量清水冲洗并送医诊治。
S36:穿戴合适的防护服装。
危险标志:
Xn:Harmful;

5-羧戊基三苯基溴化膦 毒理性

生态数据:

对水是稍微有危害的不要让未稀释或大量的产品接触地下水、水道或者污水系统,若无政府许可,勿将材料排入周围环境。

5-羧戊基三苯基溴化膦 MSDS

  Material Safety Data Sheet

Section 1. Identification of the substance
  (5-Carboxypentyl)(triphenyl)phosphonium bromide
    Product Name:
    Synonyms:

Section 2. Hazards identification
    Harmful by inhalation, in contact with skin, and if swallowed.
    H315:        Causes skin irritation    
    H319:        Causes serious eye irritation    
    H335:        May cause respiratory irritation    
    P261:        Avoid breathing dust/fume/gas/mist/vapours/spray    
    Wear protective gloves/protective clothing/eye protection/face protection
    P280:
    P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present
    and easy to do – continue rinsing
    P304+P340:        IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing    
    P405:        Store locked up    

Section 3. Composition/information on ingredients.
    (5-Carboxypentyl)(triphenyl)phosphonium bromide
    Ingredient name:
    CAS number:        50889-29-7    

Section 4. First aid measures
    Immediately wash skin with copious amounts of water for at least 15 minutes while removing
    Skin contact:
    contaminated clothing and shoes. If irritation persists, seek medical attention.
    Eye contact:        Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate    
    flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical
    attention.
    Inhalation:        Remove to fresh air. In severe cases or if symptoms persist, seek medical attention.    
    Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention.
    Ingestion:

Section 5. Fire fighting measures
    In the event of a fire involving this material, alone or in combination with other materials, use dry
    powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus
    should be worn.

Section 6. Accidental release measures
    Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national
    standards.
    Respiratory precaution:        Wear approved mask/respirator    
    Hand precaution:        Wear suitable gloves/gauntlets    
    Skin protection:        Wear suitable protective clothing    
    Eye protection:        Wear suitable eye protection    
    Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container
    for disposal. See section 12.
    Environmental precautions: Do not allow material to enter drains or water courses.

Section 7. Handling and storage
    Handling:        This product should be handled only by, or under the close supervision of, those properly qualified    
    in the handling and use of potentially hazardous chemicals, who should take into account the fire,
    health and chemical hazard data given on this sheet.
    Storage:        Store in closed vessels.    

Section 8. Exposure Controls / Personal protection
    Engineering Controls: Use only in a chemical fume hood.
    Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles.
    General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse.

Section 9. Physical and chemical properties
    Not specified
    Appearance:
    Boiling point:        No data    
    Melting point:        No data    
    Flash point:        No data    
    Density:        No data    
    Molecular formula:        C24H26O2P.Br    
    Molecular weight:        457.3    

Section 10. Stability and reactivity
    Conditions to avoid: Heat, flames and sparks.
    Materials to avoid: Oxidizing agents.
    Possible hazardous combustion products: Carbon monoxide, hydrogen bromide.

Section 11. Toxicological information
    No data.

Section 12. Ecological information
    No data.

Section 13. Disposal consideration
    Arrange disposal as special waste, by licensed disposal company, in consultation with local waste
    disposal authority, in accordance with national and regional regulations.

Section 14. Transportation information
    Non-harzardous for air and ground transportation.

Section 15. Regulatory information
    No chemicals in this material are subject to the reporting requirements of SARA Title III, Section
    302, or have known CAS numbers that exceed the threshold reporting levels established by SARA
    Title III, Section 313.


SECTION 16 - ADDITIONAL INFORMATION
N/A

5-羧戊基三苯基溴化膦 分子结构与计算化学数据

计算化学数据

1.疏水参数计算参考值(XlogP):无

2.氢键供体数量:1

3.氢键受体数量:3

4.可旋转化学键数量:9

5.互变异构体数量:无

6.拓扑分子极性表面积37.3

7.重原子数量:28

8.表面电荷:0

9.复杂度:386

10.同位素原子数量:0

11.确定原子立构中心数量:0

12.不确定原子立构中心数量:0

13.确定化学键立构中心数量:0

14.不确定化学键立构中心数量:0

15.共价键单元数量:2

5-羧戊基三苯基溴化膦 下游产品

推荐供应商更多供应商>>

湖北云镁科技有限公司

产品介绍:
产品名称:(5-羧基戊基)三苯基溴化磷 Cas号:50889-29-7 纯度:99% 包装信息:1kg铝箔袋/氟化瓶,10kg铝听/纸箱,25kg纸板桶/编织袋/塑料桶 价格:1.0元 - 25.0元
联系方式:
联系人:方经理 电话:027-59206672 手机:18327059871

湖北常鑫盛化工有限公司

产品介绍:
产品名称:5-羧基戊基-三苯基溴化磷 Cas号:50889-29-7 纯度:98 包装信息:25kg,1kg 价格:5.0元 - 10.0元
联系方式:
联系人:黄 电话:18971203904 手机:18971203904

特斯科化工(湖北)有限公司

产品介绍:
产品名称:(5-羧基戊基)三苯基溴化磷 Cas号:50889-29-7 纯度:99% 包装信息:1kg袋,25kg桶,1000kg箱 价格:洽谈
联系方式:
联系人:郑先生 电话:18971353902 手机:18971353902

武汉鑫伟烨化工有限公司

产品介绍:
产品名称:5-羧基戊基-三苯基溴化磷 Cas号:50889-29-7 纯度:98% 包装信息:25kg,25kg,25kg 价格:1.0元 - 1.0元
联系方式:
联系人:郭经理 电话:027-85953558 手机:13377862267

上海源叶生物科技有限公司

产品介绍:
产品名称:(5-羧基戊基)三苯基溴化磷 Cas号:50889-29-7 纯度:98% 包装信息:25g,5g 价格:30.0元 - 98.0元
联系方式:
联系人:Yuki 电话:021-61845781 手机:13585604150

宝鸡市国康海思化学技术有限公司

产品介绍:
产品名称:5-羧戊基三苯基溴化膦 Cas号:50889-29-7 纯度:98 包装信息:1kg 价格:洽谈
联系方式:
联系人:杨经理 电话:0917-3909592 手机:13892490616

山东西亚化学有限公司

产品介绍:
产品名称:5-羧基戊基-三苯基溴化磷 Cas号:50889-29-7 纯度:95% 包装信息:5g 价格:331.0元
联系方式:
联系人:崔 电话:4009903999 手机:18053972095

北京格林凯默科技有限公司

产品介绍:
产品名称:5-羧戊基三苯基溴化鏻 Cas号:50889-29-7 纯度:98% 包装信息:1kg 价格:洽谈
联系方式:
联系人:管 电话:010-82156189 手机:18342338366

湖北鑫鸣泰化学有限公司

产品介绍:
产品名称:5-羧基戊基-三苯基溴化磷 Cas号:50889-29-7 纯度:99% 包装信息:25/桶kg 价格:1.0元
联系方式:
联系人:黄经理 电话:027-51833411 手机:13237166274

湖北鑫鸣泰化学有限公司

产品介绍:
产品名称:5-羧戊基三苯基溴化膦 Cas号:50889-29-7 纯度:99% 包装信息:100kg,200kg 价格:1.0元 - 1.0元
联系方式:
联系人:黄 电话:027-50662354 手机:13264726139