1-(5-甲基-2-哌啶基)哌嗪

  • 基本信息
  • 物化性质
  • 安全信息
  • 毒理性
  • MSDS
  • 海关数据
  • 结构与计算化学

1-(5-甲基-2-哌啶基)哌嗪 基本信息

中文名称:
1-(5-甲基-2-哌啶基)哌嗪 
中文别名:
2-氯-3,6-二氟苯酚;
1-(5-甲基-2-哌啶基)哌嗪 
英文名称:
Phenol,2-chloro-3,6-difluoro-
英文别名:
2-Chloro-3,6-difluorophenol;
2-Chloro-3,6-difluoro-phenol;
2-chloro-3,6-fluorophenol 
CAS No.:
261762-50-9
分 子 式:
C6H3ClF2O
分 子 量:
164.5377
精确分子量:
163.98400
PSA:
20.23000
MDL:
MFCD01631450
InChI:
InChI=1/C6H3ClF2O/c7-5-3(8)1-2-4(9)6(5)10/h1-2,10H
风险术语:
20/21/22-36/37/38-41-37/38-22
分子结构式:
SDS:
查看

1-(5-甲基-2-哌啶基)哌嗪 物化性质

密度:
1.52g/cm3
熔点:
52-56ºC
沸点:
171.7ºC at 760mmHg
闪点:
57.6ºC
折射率:
1.522
蒸汽压:
1.04mmHg at 25°C
存储条件/存储方法:

保存方法:密闭,阴凉,通风干燥处

稳定性相关:

避氧化物

其它信息:

1.      性状:气味类似酚的白色晶体

2.      密度(g/mL):未确定

3.      相对蒸汽密度(g/mL,空气=1):未确定

4.      熔点(ºC):52-56

5.      沸点(ºC,常压):未确定

6.      沸点(ºC60mmHg):未确定

7.      折射率:未确定

8.      闪点(ºF):未确定

9.      比旋光度(º):未确定

10.   自燃点或引燃温度(ºC):未确定

11.   蒸气压(kPa,):未确定

12.   饱和蒸气压(kPa,60ºC):未确定

13.   燃烧热(KJ/mol):未确定

14.   临界温度(ºC):未确定

15.   临界压力(KPa):未确定

16.   油水(辛醇/水)分配系数的对数值:未确定

17.   爆炸上限(%,V/V):未确定

18.   爆炸下限(%,V/V):未确定

19.   溶解性:不能溶解于水的

1-(5-甲基-2-哌啶基)哌嗪 安全信息

包装等级:
III
海关代码:
2908199090
危险类别码:
R20/21/22
安全标志:
S26:万一接触眼睛,立即使用大量清水冲洗并送医诊治。
S39:佩戴眼/面防护装置。
危险标志:
Xi,T,Xn

1-(5-甲基-2-哌啶基)哌嗪 毒理性

生态数据:

1、其它有害作用:通常对水是稍微危害的,若无政府许可,勿将材料排入周围环境。

1-(5-甲基-2-哌啶基)哌嗪 MSDS


SECTION 1: Identification of the substance/mixture and of the company/undertaking
  Product identifiers
    Product name        : 2-Chloro-3,6-difluorophenol    
    : Fluka
    REACH No.        : A registration number is not available for this substance as the substance    
    or its uses are exempted from registration, the annual tonnage does not
    require a registration or the registration is envisaged for a later
    registration deadline.
    CAS-No.        : 261762-50-9    
  

SECTION 2: Hazards identification
  Classification of the substance or mixture
  Classification according to Regulation (EC) No 1272/2008
    Acute toxicity, Oral (Category 4), H302
    Skin irritation (Category 2), H315
    Serious eye damage (Category 1), H318
    Specific target organ toxicity - single exposure (Category 3), H335
    For the full text of the H-Statements mentioned in this Section, see Section 16.
  Classification according to EU Directives 67/548/EEC or 1999/45/EC
    Xn Harmful        R22, R37/38, R41    
    For the full text of the R-phrases mentioned in this Section, see Section 16.
  Label elements
  Labelling according Regulation (EC) No 1272/2008
    Pictogram
    Signal word        Danger    
    Hazard statement(s)
    Harmful if swallowed.
    Causes skin irritation.
    Causes serious eye damage.
    May cause respiratory irritation.
    Precautionary statement(s)
    Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray.
    Wear protective gloves/ eye protection/ face protection.
    P305 + P351 + P338        IF IN EYES: Rinse cautiously with water for several minutes. Remove    
    contact lenses, if present and easy to do. Continue rinsing.
    Supplemental Hazard        none    
    Statements
  Other hazards - none

SECTION 3: Composition/information on ingredients
  Substances
    Formula        : C6H3ClF2O    
    Molecular Weight        : 164,54 g/mol    
    CAS-No.        : 261762-50-9    
  Hazardous ingredients according to Regulation (EC) No 1272/2008
    Component        Classification        Concentration    
  2-Chloro-3,6-difluorophenol
    CAS-No.        261762-50-9        Acute Tox. 4; Skin Irrit. 2; Eye <= 100 %    
    Dam. 1; STOT SE 3; H302,
    H315, H318, H335
  Hazardous ingredients according to Directive 1999/45/EC
    Component        Classification        Concentration    
  2-Chloro-3,6-difluorophenol
    CAS-No.        261762-50-9        Xn, R22 - R37/38 - R41        <= 100 %    
    For the full text of the H-Statements and R-Phrases mentioned in this Section, see Section 16

SECTION 4: First aid measures
  Description of first aid measures
  General advice
    Consult a physician. Show this safety data sheet to the doctor in attendance.
  If inhaled
    If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
  In case of skin contact
    Wash off with soap and plenty of water. Consult a physician.
  In case of eye contact
    Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
  If swallowed
    Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
  Most important symptoms and effects, both acute and delayed
    The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
    section 11
  Indication of any immediate medical attention and special treatment needed
    no data available

SECTION 5: Firefighting measures
  Extinguishing media
  Suitable extinguishing media
    Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
  Special hazards arising from the substance or mixture
    Carbon oxides
  Advice for firefighters
    Wear self contained breathing apparatus for fire fighting if necessary.
  Further information
    no data available

SECTION 6: Accidental release measures
  Personal precautions, protective equipment and emergency procedures
    Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure
    adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust.
    For personal protection see section 8.
  Environmental precautions
    Do not let product enter drains.
  Methods and materials for containment and cleaning up
    Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
    containers for disposal.
  Reference to other sections
    For disposal see section 13.

SECTION 7: Handling and storage
  Precautions for safe handling
    Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
    Provide appropriate exhaust ventilation at places where dust is formed.Normal measures for preventive fire
    protection.
    For precautions see section 2.2.
  Conditions for safe storage, including any incompatibilities
    Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
  Specific end use(s)
    Apart from the uses mentioned in section 1.2 no other specific uses are stipulated

SECTION 8: Exposure controls/personal protection
  Control parameters
  Components with workplace control parameters
  Exposure controls
  Appropriate engineering controls
    Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
    at the end of workday.
  Personal protective equipment
  Eye/face protection
    Face shield and safety glasses Use equipment for eye protection tested and approved under
    appropriate government standards such as NIOSH (US) or EN 166(EU).
  Skin protection
    Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
    (without touching glove's outer surface) to avoid skin contact with this product. Dispose of
    contaminated gloves after use in accordance with applicable laws and good laboratory practices.
    Wash and dry hands.
    The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
    the standard EN 374 derived from it.
    Full contact
    Material: Nitrile rubber
    Minimum layer thickness: 0,11 mm
    Break through time: 480 min
    Splash contact
    Material: Nitrile rubber
    Minimum layer thickness: 0,11 mm
    Break through time: 480 min
    test method: EN374
    If used in solution, or mixed with other substances, and under conditions which differ from EN 374,
    contact the supplier of the CE approved gloves. This recommendation is advisory only and must
    be evaluated by an industrial hygienist and safety officer familiar with the specific situation of
    anticipated use by our customers. It should not be construed as offering an approval for any
    specific use scenario.
  Body Protection
    Complete suit protecting against chemicals, The type of protective equipment must be selected
    according to the concentration and amount of the dangerous substance at the specific workplace.
  Respiratory protection
    Where risk assessment shows air-purifying respirators are appropriate use a full-face particle
    respirator type N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering
    controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use
    respirators and components tested and approved under appropriate government standards such
    as NIOSH (US) or CEN (EU).
  Control of environmental exposure
    Do not let product enter drains.

SECTION 9: Physical and chemical properties
  Information on basic physical and chemical properties
    a) Appearance        Form: solid    
    b) Odour        no data available    
    c) Odour Threshold        no data available    
    d) pH        no data available    
    e) Melting point/freezing        no data available    
    point
    f) Initial boiling point and no data available
    boiling range
    g) Flash point        no data available    
    h) Evapouration rate        no data available    
    i) Flammability (solid, gas) no data available
    j) Upper/lower        no data available    
    flammability or
    explosive limits
    k) Vapour pressure        no data available    
    l) Vapour density        no data available    
    m) Relative density        no data available    
    n) Water solubility        no data available    
    o) Partition coefficient: n- log Pow: 2,6
    octanol/water
    p) Auto-ignition        no data available    
    temperature
    q) Decomposition        no data available    
    temperature
    r) Viscosity        no data available    
    s) Explosive properties        no data available    
    t) Oxidizing properties        no data available    
  Other safety information
    no data available

SECTION 10: Stability and reactivity
  Reactivity
    no data available
  Chemical stability
    Stable under recommended storage conditions.
  Possibility of hazardous reactions
    no data available
  Conditions to avoid
    no data available
  Incompatible materials
    no data available
  Hazardous decomposition products
    Other decomposition products - no data available
    In the event of fire: see section 5

SECTION 11: Toxicological information
  Information on toxicological effects
  Acute toxicity
    no data available
  Skin corrosion/irritation
    no data available
  Serious eye damage/eye irritation
    no data available
  Respiratory or skin sensitisation
    no data available
  Germ cell mutagenicity
    no data available
  Carcinogenicity
    IARC:        No component of this product present at levels greater than or equal to 0.1% is identified as    
    probable, possible or confirmed human carcinogen by IARC.
  Reproductive toxicity
    no data available
  Specific target organ toxicity - single exposure
    Inhalation - May cause respiratory irritation.
  Specific target organ toxicity - repeated exposure
    no data available
  Aspiration hazard
    no data available
  Additional Information
    RTECS: Not available

SECTION 12: Ecological information
  Toxicity
    no data available
  Persistence and degradability
    no data available
  Bioaccumulative potential
    no data available
  Mobility in soil
    no data available
  Results of PBT and vPvB assessment
    PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
  Other adverse effects
    no data available

SECTION 13: Disposal considerations
  Waste treatment methods
  Product
    Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed
    professional waste disposal service to dispose of this material. Dissolve or mix the material with a
    combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
  Contaminated packaging
    Dispose of as unused product.

SECTION 14: Transport information
  UN number
    ADR/RID: -        IMDG: -        IATA: -    
  UN proper shipping name
    ADR/RID: Not dangerous goods
    IMDG: Not dangerous goods
    IATA:        Not dangerous goods    
  Transport hazard class(es)
    ADR/RID: -        IMDG: -        IATA: -    
  Packaging group
    ADR/RID: -        IMDG: -        IATA: -    
  Environmental hazards
    ADR/RID: no        IMDG Marine pollutant: no        IATA: no    
  Special precautions for user
    no data available

SECTION 15: Regulatory information
    This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
  Safety, health and environmental regulations/legislation specific for the substance or mixture
    no data available
  Chemical Safety Assessment


SECTION 16 - ADDITIONAL INFORMATION
N/A

1-(5-甲基-2-哌啶基)哌嗪 海关数据

中国海关编码:2908199090

概述:
HS:2908199090 其他酚及酚醇的仅含卤素取代基的衍生物及其盐 增值税率:17.0% 退税率:9.0% 监管条件:无 最惠国关税:5.5% 普通关税:30.0%
申报要素:
品名, 成分含量, 用途
摘要/Summary:
HS: 2908199090. derivatives of polyphenols or phenol-alcohols containing only halogen substituents and their salts. VAT:17.0%. tax rebate rate:9.0%. supervision conditions:None. MFN tariff:5.5%. general tariff:30.0%

1-(5-甲基-2-哌啶基)哌嗪 分子结构与计算化学数据

计算化学数据

1.疏水参数计算参考值(XlogP):2.4

2.氢键供体数量:1

3.氢键受体数量:3

4.可旋转化学键数量:0

5.互变异构体数量:3

6.拓扑分子极性表面积20.2

7.重原子数量:10

8.表面电荷:0

9.复杂度:122

10.同位素原子数量:0

11.确定原子立构中心数量:0

12.不确定原子立构中心数量:0

13.确定化学键立构中心数量:0

14.不确定化学键立构中心数量:0

15.共价键单元数量:1

推荐供应商更多供应商>>

湖北实兴化工有限公司

产品介绍:
产品名称:2-氯-3,6-二氟苯酚(261762-50-9) Cas号:261762-50-9 纯度:99% 包装信息:1kg,25kg,50kg,200kg,500kg 价格:1.0元 - 10.0元
联系方式:
联系人:张妍 电话:13554155445 手机:13554155445

阿法埃莎(天津)化学有限公司

产品介绍:
产品名称:2-氯-3,6-二氟苯酚 Cas号:261762-50-9 纯度: 包装信息:洽谈 价格:洽谈
联系方式:
联系人:张海滨 电话:800-810-6000 手机: