四甲基邻苯二甲酸氢铵

  • 基本信息
  • 物化性质
  • 安全信息
  • 毒理性
  • MSDS
  • 海关数据
  • 结构与计算化学
  • 上游产品

四甲基邻苯二甲酸氢铵 基本信息

中文名称:
四甲基邻苯二甲酸氢铵 
中文别名:
四甲基邻苯二甲酸氢铵;
Methanaminium,n,n,n-trimethyl-,1,2-benzenedicarboxylate(1:1) Phthalic acid mono(tetramethylammonium)salt Tetramethylammonium biphthalate Tetramethylammonium hydrogen phthalate Tetramethylammonium phthalate monobasic Tetramethylammonium hydrogenphthalate, 
英文名称:
tetramethylammonium hydrogen phthalate
英文别名:
2-carboxybenzoate,tetramethylazanium;
Tetramethylammonium phthalate monobasic;
monotetramethylammonium hydrogen phthalate;
Methanaminium,N,N,N-trimethyl-,1,2-benzenedicarboxylate (1:1);
Phthalic acid mono(tetramethylammonium)salt;
Tetramethylammonium hydrogenphthalate;
mono-tetramethylammonium phthalate 
CAS No.:
79723-02-7
分 子 式:
C12H17NO4
分 子 量:
239.27
精确分子量:
239.11600
PSA:
77.43000
MDL:
MFCD00216634
EINECS:
416-900-5
BRN:
4621101
InChI:
The Key: KQTFRASJMFIJPC-UHFFFAOYSA-M
危险品标志:
N
风险术语:
R25R50R48/22
安全术语:
S25S36S45S61
分子结构式:
SDS:
查看

四甲基邻苯二甲酸氢铵 物化性质

熔点:
142-146ºC
存储条件/存储方法:

存放在密封容器内,并放在阴凉,干燥处。储存的地方必须远离氧化剂。

稳定性相关:

远离氧化物

其它信息:

1.       性状:白色晶体。

2.       密度(g/mL,25/4):未确定

3.       相对蒸汽密度(g/mL,空气=1):未确定

4.       熔点(ºC):148-150

5.       沸点(ºC,常压):未确定

6.       沸点(ºC,5.2kPa):未确定

7.       折射率:未确定

8.       闪点(ºC):未确定

9.       比旋光度(º):未确定

10.    自燃点或引燃温度(ºC):未确定

11.    蒸气压(kPa,25ºC):未确定

12.    饱和蒸气压(kPa,60ºC):未确定

13.    燃烧热(KJ/mol):未确定

14.    临界温度(ºC):未确定

15.    临界压力(KPa):未确定

16.    油水(辛醇/水)分配系数的对数值:未确定

17.    爆炸上限(%,V/V):未确定

18.    爆炸下限(%,V/V):未确定

19.    溶解性:部分可溶于水。

四甲基邻苯二甲酸氢铵 安全信息

包装等级:
III
风险类别:
6.1
海关代码:
2923900090
危险类别码:
25-48/22-50
安全说明:
25-36-45-61
安全标志:
S25:避免接触眼睛。
S36:穿戴合适的防护服装。
S45:出现意外或者感到不适,立刻到医生那里寻求帮助(最好带去产品容器标签)。
S61:避免排放到环境中。参考专门的说明/安全数据表。
危险标志:
T: Toxic;N: Dangerous for the environment;

四甲基邻苯二甲酸氢铵 毒理性

生态数据:

对水稍微有危害的,不要让未稀释或者大量产品接触地下水,水道或者污水系统。若无政府许可,勿将材料排入周围环境。对水中的鱼类和浮游生物也有毒害。对水中有机物质有剧毒。

四甲基邻苯二甲酸氢铵 MSDS


Section 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE
  Product identifiers
    Product name        : Tetramethylammonium hydrogenphthalate    
    CAS-No.        : 79723-02-7    
  Relevant identified uses of the substance or mixture and uses advised against
    Identified uses        : Laboratory chemicals, Manufacture of substances    
  
  

Section 2. HAZARDS IDENTIFICATION
  Classification of the substance or mixture
  Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
    Specific target organ toxicity - repeated exposure (Category 2)
    Acute aquatic toxicity (Category 1)
    Acute toxicity, Oral (Category 3)
  Classification according to EU Directives 67/548/EEC or 1999/45/EC
    Very toxic to aquatic organisms. Toxic if swallowed. Harmful: danger of serious damage to health by
    prolonged exposure if swallowed.
  Label elements
  Labelling according Regulation (EC) No 1272/2008 [CLP]
    Pictogram
    Signal word        Danger    
    Hazard statement(s)
    H373        May cause damage to organs through prolonged or repeated exposure.    
    H400        Very toxic to aquatic life.    
    H301        Toxic if swallowed.    
    Precautionary statement(s)
    P273        Avoid release to the environment.    
    P301 + P310        IF SWALLOWED: Immediately call a POISON CENTER or doctor/    
    physician.
    Supplemental Hazard        none    
    Statements
  According to European Directive 67/548/EEC as amended.
    Hazard symbol(s)
    R-phrase(s)
    R25        Toxic if swallowed.    
    R48/22        Harmful: danger of serious damage to health by prolonged exposure if    
    swallowed.
    R50        Very toxic to aquatic organisms.    
    S-phrase(s)
    S25        Avoid contact with eyes.    
    S36        Wear suitable protective clothing.    
    S45        In case of accident or if you feel unwell, seek medical advice immediately    
    (show the label where possible).
    S61        Avoid release to the environment. Refer to special instructions/ Safety    
    data sheets.
  Other hazards - none

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
  Substances
    Synonyms        : Phthalic acid mono(tetramethylammonium)salt    
    Tetramethylammonium phthalatemonobasic
    Formula        : C12H17NO4    
    Molecular Weight        : 239,27 g/mol    
    Component        Concentration    
  Tetramethylammonium hydrogenphthalate
    CAS-No.        79723-02-7        -    
    EC-No.        416-900-5    
    Index-No.        607-478-00-5    

Section 4. FIRST AID MEASURES
  Description of first aid measures
  General advice
    Consult a physician. Show this safety data sheet to the doctor in attendance.
  If inhaled
    If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
  In case of skin contact
    Wash off with soap and plenty of water. Take victim immediately to hospital. Consult a physician.
  In case of eye contact
    Flush eyes with water as a precaution.
  If swallowed
    Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
  Most important symptoms and effects, both acute and delayed
    To the best of our knowledge, the chemical, physical, and toxicological properties have not been
    thoroughly investigated.
  Indication of any immediate medical attention and special treatment needed
    no data available

Section 5. FIREFIGHTING MEASURES
  Extinguishing media
  Suitable extinguishing media
    Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
  Special hazards arising from the substance or mixture
    Carbon oxides, nitrogen oxides (NOx)
  Advice for firefighters
    Wear self contained breathing apparatus for fire fighting if necessary.
  Further information
    no data available

Section 6. ACCIDENTAL RELEASE MEASURES
  Personal precautions, protective equipment and emergency procedures
    Wear respiratory protection. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure adequate
    ventilation. Evacuate personnel to safe areas. Avoid breathing dust.
  Environmental precautions
    Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the
    environment must be avoided.
  Methods and materials for containment and cleaning up
    Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
    containers for disposal.
  Reference to other sections
    For disposal see section 13.

Section 7. HANDLING AND STORAGE
  Precautions for safe handling
    Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
    Provide appropriate exhaust ventilation at places where dust is formed.
  Conditions for safe storage, including any incompatibilities
    Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
  Specific end uses
    no data available

Section 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
  Control parameters
  Components with workplace control parameters
  Exposure controls
  Appropriate engineering controls
    Avoid contact with skin, eyes and clothing. Wash hands before breaks and immediately after handling
    the product.
  Personal protective equipment
  Eye/face protection
    Face shield and safety glasses Use equipment for eye protection tested and approved under
    appropriate government standards such as NIOSH (US) or EN 166(EU).
  Skin protection
    Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
    (without touching glove's outer surface) to avoid skin contact with this product. Dispose of
    contaminated gloves after use in accordance with applicable laws and good laboratory practices.
    Wash and dry hands.
    The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
    the standard EN 374 derived from it.
  Body Protection
    Complete suit protecting against chemicals, The type of protective equipment must be selected
    according to the concentration and amount of the dangerous substance at the specific workplace.
  Respiratory protection
    Where risk assessment shows air-purifying respirators are appropriate use a full-face particle
    respirator type N99 (US) or type P2 (EN 143) respirator cartridges as a backup to engineering
    controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use
    respirators and components tested and approved under appropriate government standards such
    as NIOSH (US) or CEN (EU).

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
  Information on basic physical and chemical properties
    a) Appearance        Form: crystalline    
    Colour: white
    b) Odour        no data available    
    c) Odour Threshold        no data available    
    d) pH        no data available    
    e) Melting point/freezing        Melting point/range: 148 - 150 °C - lit.    
    point
    f) Initial boiling point and no data available
    boiling range
    g) Flash point        no data available    
    h) Evaporation rate        no data available    
    i) Flammability (solid, gas) no data available
    j) Upper/lower        no data available    
    flammability or
    explosive limits
    k) Vapour pressure        no data available    
    l) Vapour density        no data available    
    m) Relative density        no data available    
    n) Water solubility        no data available    
    o) Partition coefficient: n- no data available
    octanol/water
    p) Autoignition        no data available    
    temperature
    q) Decomposition        no data available    
    temperature
    r) Viscosity        no data available    
    s) Explosive properties        no data available    
    t) Oxidizing properties        no data available    
  Other safety information
    no data available

Section 10. STABILITY AND REACTIVITY
  Reactivity
    no data available
  Chemical stability
    no data available
  Possibility of hazardous reactions
    no data available
  Conditions to avoid
    no data available
  Incompatible materials
    Strong oxidizing agents
  Hazardous decomposition products
    Other decomposition products - no data available

Section 11. TOXICOLOGICAL INFORMATION
  Information on toxicological effects
  Acute toxicity
    no data available
  Skin corrosion/irritation
    no data available
  Serious eye damage/eye irritation
    no data available
  Respiratory or skin sensitization
    no data available
  Germ cell mutagenicity
    no data available
  Carcinogenicity
    IARC:        No component of this product present at levels greater than or equal to 0.1% is identified as    
    probable, possible or confirmed human carcinogen by IARC.
  Reproductive toxicity
    no data available
  Specific target organ toxicity - single exposure
    no data available
  Specific target organ toxicity - repeated exposure
    no data available
  Aspiration hazard
    no data available
  Potential health effects
  Inhalation        May be harmful if inhaled. May cause respiratory tract irritation.    
  Ingestion        Toxic if swallowed.    
  Skin        May be harmful if absorbed through skin. May cause skin irritation.    
  Eyes        May cause eye irritation.    
  Signs and Symptoms of Exposure
    To the best of our knowledge, the chemical, physical, and toxicological properties have not been
    thoroughly investigated.
  Additional Information
    RTECS: Not available

Section 12. ECOLOGICAL INFORMATION
  Toxicity
    no data available
  Persistence and degradability
    no data available
  Bioaccumulative potential
    no data available
  Mobility in soil
    no data available
  Results of PBT and vPvB assessment
    no data available
  Other adverse effects
    Very toxic to aquatic life.
    Avoid release to the environment.

Section 13. DISPOSAL CONSIDERATIONS
  Waste treatment methods
  Product
    Offer surplus and non-recyclable solutions to a licensed disposal company. Dissolve or mix the material
    with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
  Contaminated packaging
    Dispose of as unused product.

Section 14. TRANSPORT INFORMATION
  UN number
    ADR/RID: 2811        IMDG: 2811        IATA: 2811    
  UN proper shipping name
    ADR/RID: TOXIC SOLID, ORGANIC, N.O.S. (Tetramethylammonium hydrogenphthalate)
    IMDG: TOXIC SOLID, ORGANIC, N.O.S. (Tetramethylammonium hydrogenphthalate)
    IATA:        Toxic solid, organic, n.o.s. (Tetramethylammonium hydrogenphthalate)    
  Transport hazard class(es)
    ADR/RID: 6.1        IMDG: 6.1        IATA: 6.1    
  Packaging group
    ADR/RID: III        IMDG: III        IATA: III    
  Environmental hazards
    ADR/RID: yes        IMDG Marine pollutant: yes        IATA: no    
  Special precautions for user
    no data available



SECTION 15 - REGULATORY INFORMATION
N/A


SECTION 16 - ADDITIONAL INFORMATION
N/A

四甲基邻苯二甲酸氢铵 海关数据

中国海关编码:2923900090

概述:
2923900090 其他季铵盐及季铵碱。监管条件:无。增值税率:17.0%。退税率:9.0%。最惠国关税:6.5%。普通关税:30.0%
申报要素:
品名, 成分含量, 用途
摘要/Summary:
2923900090 other quaternary ammonium salts and hydroxides。Supervision conditions:None。VAT:17.0%。Tax rebate rate:9.0%。MFN tariff:6.5%。General tariff:30.0%

四甲基邻苯二甲酸氢铵 分子结构与计算化学数据

计算化学数据

1.疏水参数计算参考值(XlogP):无

2.氢键供体数量:1

3.氢键受体数量:4

4.可旋转化学键数量:1

5.互变异构体数量:无

6.拓扑分子极性表面积77.4

7.重原子数量:17

8.表面电荷:0

9.复杂度:213

10.同位素原子数量:0

11.确定原子立构中心数量:0

12.不确定原子立构中心数量:0

13.确定化学键立构中心数量:0

14.不确定化学键立构中心数量:0

15.共价键单元数量:2

推荐供应商更多供应商>>

山东西亚化学有限公司

产品介绍:
产品名称:四甲基邻苯二甲酸氢铵 Cas号:79723-02-7 纯度:99% 包装信息:25g 价格:786.0元
联系方式:
联系人:崔 电话:4009903999 手机:18053972095

郑州杰克斯化工有限公司

产品介绍:
产品名称:四甲基邻苯二甲酸氢铵 Cas号:79723-02-7 纯度: 包装信息:洽谈 价格:洽谈
联系方式:
联系人:许伟伟 电话:0371-86259281 15981966935 手机:15981966935

阿法埃莎(天津)化学有限公司

产品介绍:
产品名称:四甲基邻苯二甲酸氢铵 Cas号:79723-02-7 纯度: 包装信息:洽谈 价格:洽谈
联系方式:
联系人:张海滨 电话:800-810-6000 手机: