恩他卡朋

  • 基本信息
  • 制备方法及用途
  • 物化性质
  • 安全信息
  • MSDS
  • 结构与计算化学
  • 上游产品

恩他卡朋 基本信息

中文名称:
恩他卡朋 
中文别名:
恩他卡朋;
(2E)-2-氰基-3-(3,4-二羟基-5-硝基苯基)-N,N-二乙基-2-丙烯酰胺;
(E)-2-氰基-3-(3,4二羟基-5-硝基苯)-N,N二乙基丙烯酰胺;
安托卡朋 F·S;
安托卡朋;
(E)-2-氰基-3-(3,4-二羟基-5-硝基苯基)-N,N-二乙基-2-丙烯酰胺 
英文名称:
2-Propenamide,2-cyano-3-(3,4-dihydroxy-5-nitrophenyl)-N,N-diethyl-, (2E)-
英文别名:
entacapone;
OR-611;
Comtes;
2-Cyano-N,N-diethyl-3-(3,4-dihydroxy-5-nitrophenyl)propenamide;
Comtess;
Entacapone;
Comtan 
CAS No.:
130929-57-6
分 子 式:

C14H15N3O5

分 子 量:
305.29
精确分子量:
305.10100
PSA:
130.38000
InChI:
The Key: JRURYQJSLYLRLN-BJMVGYQFSA-N
危险品标志:

 

风险术语:

 

安全术语:

 

分子结构式:
SDS:
查看

恩他卡朋 制备方法及用途

制备方法

1.83g 3,4-二羟基-5-硝基苯甲醛和1.5g N,N-二乙基氰基乙酰胺和催化量的哌啶乙酸盐溶于40ml干燥乙醇中,搅拌过夜,得2.23g粗品,收率73%,熔点153~156℃. 2. 在90℃下加热,将3.0kg粗品溶于含80gHBr(或40gHCl)的8.0kg乙酸(或甲酸)中.缓慢冷却到20℃,并在此温度搅拌20h,然后在15℃搅拌6h.过滤收集析出的结晶,先小心地用冷的(4℃)1L甲苯-乙酸(1:lv/v)的混合液洗,再用1L的冷甲苯洗.在真空和45℃下干燥,得2.4kg结晶性的纯的恩他卡朋,收率80%,mp162~163℃.

合成制备方法

1.83g 3,4-二羟基-5-硝基苯甲醛和1.5g N,N-二乙基氰基乙酰胺和催化量的哌啶乙酸盐溶于40ml干燥乙醇中,搅拌过夜,得2.23g粗品,收率73%,熔点153~156℃.

2. 在90℃下加热,将3.0kg粗品溶于含80gHBr(或40gHCl)的8.0kg乙酸(或甲酸)中.缓慢冷却到20℃,并在此温度搅拌20h,然后在15℃搅拌6h.过滤收集析出的结晶,先小心地用冷的(4℃)1L甲苯-乙酸(1:lv/v)的混合液洗,再用1L的冷甲苯洗.在真空和45℃下干燥,得2.4kg结晶性的纯的恩他卡朋,收率80%,mp162~163℃.

用途简介

为COMT抑制剂,用于治疗帕金森病。 本品为新一代COMT(儿茶酚-O-甲基转移酶)抑制剂,是选择性强、毒性小、口服仍有活性的高效COMT抑制剂.用于帕金森病的治疗,能有效抑制左旋多巴的O-甲基化,增加左旋多巴在中枢的生物利用度,减少其用量及服药次数,并改善左旋多巴长期治疗引起的运动波动.病人耐受性良好,但作用时间较短(2h).

用途

为COMT抑制剂,用于治疗帕金森病。

本品为新一代COMT(儿茶酚-O-甲基转移酶)抑制剂,是选择性强、毒性小、口服仍有活性的高效COMT抑制剂.用于帕金森病的治疗,能有效抑制左旋多巴的O-甲基化,增加左旋多巴在中枢的生物利用度,减少其用量及服药次数,并改善左旋多巴长期治疗引起的运动波动.病人耐受性良好,但作用时间较短(2h).

恩他卡朋 物化性质

外观与性状:
黄色粉末
密度:
1.392g/cm3
熔点:
162-1630C
沸点:
526.6ºC at 760 mmHg
闪点:
272.3ºC
折射率:
1.641
蒸汽压:
1.05E-11mmHg at 25°C
其它信息:

1.性状:结晶。

2.熔点:162~163℃。

恩他卡朋 安全信息

包装等级:
III
风险类别:
3
海关代码:
2942000000
WGK_Germany:
1
德国有关水污染物质的分类清单
危险类别码:
R10:Flammable. R20/21/22:Harmful by inhalation, in contact with skin and if swallowed . R37/38:Irritating to respiratory system and skin . R41:Risk of serious damage to eyes. R62:Possible risk of impaired fertility. R38:Irritating to the skin. R36/37/38:I
安全说明:
S26-S36-S39-S45-S36/37/39-S16
RTECS号:
KM5250000
危险标志:
Xn,T,F

恩他卡朋 MSDS

  Material Safety Data Sheet

Section 1. Identification of the substance
    Product Name:      Entacapone    
    Synonyms:

Section 2. Hazards identification
    Harmful by inhalation, in contact with skin, and if swallowed.

Section 3. Composition/information on ingredients.
    Ingredient name:        Entacapone    
    CAS number:        130929-57-6    

Section 4. First aid measures
    Skin contact:        Immediately wash skin with copious amounts of water for at least 15 minutes while removing    
    contaminated clothing and shoes. If irritation persists, seek medical attention.
    Eye contact:        Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate    
    flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical
    attention.
    Inhalation:        Remove to fresh air. In severe cases or if symptoms persist, seek medical attention.    
    Ingestion:        Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention.    

Section 5. Fire fighting measures
    In the event of a fire involving this material, alone or in combination with other materials, use dry
    powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus
    should be worn.

Section 6. Accidental release measures
    Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national
    standards.
    Respiratory precaution:        Wear approved mask/respirator    
    Hand precaution:        Wear suitable gloves/gauntlets    
    Skin protection:        Wear suitable protective clothing    
    Eye protection:        Wear suitable eye protection    
    Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container
    for disposal. See section 12.
    Environmental precautions: Do not allow material to enter drains or water courses.

Section 7. Handling and storage
    Handling:        This product should be handled only by, or under the close supervision of, those properly qualified    
    in the handling and use of potentially hazardous chemicals, who should take into account the fire,
    health and chemical hazard data given on this sheet.
    Store in closed vessels, refrigerated.
    Storage:

Section 8. Exposure Controls / Personal protection
    Engineering Controls: Use only in a chemical fume hood.
    Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles.
    General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse.

Section 9. Physical and chemical properties
    Appearance:        Not specified    
    Boiling point:        No data    
    No data
    Melting point:
    Flash point:        No data    
    Density:        No data    
    Molecular formula:        C14H15N3O5    
    Molecular weight:        305.3    

Section 10. Stability and reactivity
    Conditions to avoid: Heat, flames and sparks.
    Materials to avoid: Oxidizing agents.
    Possible hazardous combustion products: Carbon monoxide, nitrogen oxides.

Section 11. Toxicological information
    No data.

Section 12. Ecological information
    No data.

Section 13. Disposal consideration
    Arrange disposal as special waste, by licensed disposal company, in consultation with local waste
    disposal authority, in accordance with national and regional regulations.

Section 14. Transportation information
    Non-harzardous for air and ground transportation.

Section 15. Regulatory information
    No chemicals in this material are subject to the reporting requirements of SARA Title III, Section
    302, or have known CAS numbers that exceed the threshold reporting levels established by SARA
    Title III, Section 313.


SECTION 16 - ADDITIONAL INFORMATION
N/A

恩他卡朋 分子结构与计算化学数据

分子结构数据

1、  摩尔折射率:79.12

2、  摩尔体积(cm3/mol):219.2

3、  等张比容(90.2K):629.8

4、  表面张力(dyne/cm):68.1

5、  极化率(10-24cm3):31.36

计算化学数据

1.疏水参数计算参考值(XlogP):2.1

2.氢键供体数量:2

3.氢键受体数量:6

4.可旋转化学键数量:4

5.互变异构体数量:16

6.拓扑分子极性表面积130

7.重原子数量:22

8.表面电荷:0

9.复杂度:500

10.同位素原子数量:0

11.确定原子立构中心数量:0

12.不确定原子立构中心数量:0

13.确定化学键立构中心数量:1

14.不确定化学键立构中心数量:0

15.共价键单元数量:1

推荐供应商更多供应商>>

湖北云镁科技有限公司

产品介绍:
产品名称:恩他卡朋 Cas号:130929-57-6 纯度:99% 包装信息:1kg铝箔袋/氟化瓶,10kg铝听/纸箱,25kg纸板桶/编织袋/塑料桶 价格:1.0元 - 25.0元
联系方式:
联系人:方经理 电话:027-59206672 手机:18327059871

湖北鑫红利化工有限公司

产品介绍:
产品名称:恩他卡朋 Cas号:130929-57-6 纯度:99% 包装信息:1t吨袋,200kg镀锌铁桶/塑料桶,25kg纸板桶/编织袋/塑料桶,10kg铝听/纸箱,1kg铝箔袋/氟化瓶 价格:1.0元 - 1,000.0元
联系方式:
联系人:周女士 电话:027-59503710 手机:18871490254

湖北军瑞生物科技有限公司

产品介绍:
产品名称:恩他卡朋 Cas号:130929-57-6 纯度:99% 包装信息:200镀锌铁桶/塑料桶kg,25纸板桶/编织袋/塑料桶kg,10铝听/纸箱kg,1铝箔袋/氟化瓶kg 价格:1.0元 - 25.0元
联系方式:
联系人:向 电话:13971166412 手机:13971166412

北京百灵威科技有限公司

产品介绍:
产品名称:恩他卡朋 374228 Cas号:130929-57-6 纯度:98% 包装信息:50mg,200mg 价格:洽谈
联系方式:
联系人:翟先生 电话:18210857532 手机:18210857532

广州卡芬生物科技 有限公司

产品介绍:
产品名称:恩他卡朋 Cas号:130929-57-6 纯度:99% 包装信息:25kg 价格:洽谈
联系方式:
联系人:张茜 电话:020-31121512 手机:17354340034

上海源叶生物科技有限公司

产品介绍:
产品名称:130929-57-6 Cas号:130929-57-6 纯度:99% 包装信息:25mg,100mg,50mg 价格:680.0元 - 1,680.0元
联系方式:
联系人:Yuki 电话:021-61845781 手机:13585604150

上海启太生物科技有限公司

产品介绍:
产品名称:恩他卡朋杂质 Cas号:130929-57-6 纯度:95% 包装信息:25mg支 价格:洽谈
联系方式:
联系人:肖经理 电话:176-21686100 手机:17621686100

宝鸡市国康海思化学技术有限公司

产品介绍:
产品名称:恩他卡朋 Cas号:130929-57-6 纯度:98 包装信息:1kg 价格:洽谈
联系方式:
联系人:杨经理 电话:0917-3909592 手机:13892490616

湖北魏氏化学试剂股份有限公司

产品介绍:
产品名称:恩他卡朋 Cas号:130929-57-6 纯度:99% 包装信息:25/纸板桶kg 价格:洽谈
联系方式:
联系人:张经理 电话:027-59102966 手机:18717199209

钟祥市耀威生物科技有限公司

产品介绍:
产品名称:恩他卡朋/130929-57-6 Cas号:130929-57-6 纯度:99% 包装信息:1kg,25kg,1kg 价格:洽谈
联系方式:
联系人:李经理 电话:15337241005 手机:15337241005