甲基丙烯酸氢糠酯

  • 基本信息
  • 物化性质
  • 安全信息
  • 毒理性
  • MSDS
  • 海关数据
  • 结构与计算化学
  • 上游产品

甲基丙烯酸氢糠酯 基本信息

中文名称:
甲基丙烯酸氢糠酯 
中文别名:
甲基丙烯酸四氢糠基酯;
甲基丙烯酸四氢糠酯;
2-甲基-2-丙烯酸(四氢-2-呋喃基)甲酯;
甲基丙烯酸氢糠酯 
英文名称:
2-Propenoic acid,2-methyl-, (tetrahydro-2-furanyl)methyl ester
英文别名:
oxolan-2-ylmethyl 2-methylprop-2-enoate;
SR 203;
2-methyl-propenoic acid tetrahydrofuranyl-methyl ester;
Methacrylic Acid Tetrahydrofurfuryl Ester;
Sartomer SR 203;
Methacrylic acid tetrahydrofurfuryl ester;
EINECS 219-529-5;
Methacrylsaeure-tetrahydrofurfurylester;
Tetrahydrofurfuryl Methacrylate 
CAS No.:
2455-24-5
分 子 式:

C9H14O3

分 子 量:
170.21
精确分子量:
170.09400
PSA:
35.53000
MDL:
MFCD00014515
EINECS:
219-529-5
BRN:
117423
InChI:
InChI=1/C9H14O3/c1-7(2)9(10)12-6-8-4-3-5-11-8/h8H,1,3-6H2,2H3
危险品标志:

 

风险术语:

R10;R36/37/38;

安全术语:
S26;S28;
分子结构式:
SDS:
查看

甲基丙烯酸氢糠酯 物化性质

密度:
1.044 g/mL at 25 °C(lit.)
沸点:
52 °C0.4 mm Hg(lit.)
闪点:
195 °F
折射率:
n20/D 1.458(lit.)
蒸汽压:
0.0094mmHg at 25°C
存储条件/存储方法:

保持容器密封,放入紧密的出藏器内,储存在阴凉,干燥的地方     

稳定性相关:

常温常压下稳定,避免氧化物,光接触

其它信息:

1.      性状:无色或灰黄色液体

2.      密度(g/mL, ,20℃):1.04

3.      相对蒸汽密度(g/mL,空气=1):未确定

4.      熔点(ºC):未确定

5.      沸点(ºC,常压):178

6.      沸点(ºC 9mmHg):未确定

7.      折射率nD20):未确定

8.      闪点(ºC未确定

9.      比旋光度():未确定

10.   自燃点或引燃温度(ºC):90

11.   蒸气压(Pa,20ºC):未确定

12.   饱和蒸气压(kPa, 0ºC):未确定

13.   燃烧热(KJ/mol):未确定

14.   临界温度(ºC):未确定

15.   临界压力(KPa):未确定

16.   油水(辛醇/水)分配系数的对数值:未确定

17.   爆炸上限(%,V/V):未确定

18.   爆炸下限(%,V/V):未确定

19.   溶解性:不能拌和的或难以拌和

甲基丙烯酸氢糠酯 安全信息

包装等级:
III
风险类别:
3
海关代码:
2932190090
WGK_Germany:
1
德国有关水污染物质的分类清单
危险类别码:
R10;R36/37/38
安全说明:
S36
安全标志:
S36:穿戴合适的防护服装。

甲基丙烯酸氢糠酯 毒理性

生态数据:

对水是危害的,即使是小量的产品渗入地下也会对饮用水造成危险若无政府许可,勿将材料排入周围环境

甲基丙烯酸氢糠酯 MSDS

  Tetrahydrofurfuryl Methacrylate (stabilized with MEHQ) Revision number: 5
  SAFETY DATA SHEET

Section 1. IDENTIFICATION
  Product name:        Tetrahydrofurfuryl Methacrylate (stabilized with MEHQ)    
    
  Revision number:        5    

Section 2. HAZARDS IDENTIFICATION
  GHS classification
  PHYSICAL HAZARDS        Not classified    
  HEALTH HAZARDS
  Skin corrosion/irritation        Category 2    
    Category 2A
  Serious eye damage/eye irritation
  ENVIRONMENTAL HAZARDS        Not classified    
  GHS label elements, including precautionary statements
  Pictograms or hazard symbols
  Signal word        Warning    
  Hazard statements        Causes skin irritation    
    Causes serious eye irritation
  Precautionary statements:
    Wash hands thoroughly after handling.
  [Prevention]
    Wear protective gloves/eye protection/face protection.
    IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses,
  [Response]
    if present and easy to do. Continue rinsing.
    If eye irritation persists: Get medical advice/attention.
    IF ON SKIN: Gently wash with plenty of soap and water.
    If skin irritation occurs: Get medical advice/attention.
    Take off contaminated clothing and wash before reuse.
    May cause polimerization.
  Other hazards which do not
  result in classification

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
  Substance/mixture:        Substance    
  Components:        Tetrahydrofurfuryl Methacrylate (stabilized with MEHQ)    
  Percent:        >95.0%(GC)    
  CAS Number:        2455-24-5    
  Synonyms:        Methacrylic Acid Tetrahydrofurfuryl Ester    
  Chemical Formula:        C9H14O3    
  MEHQ)

Section 4. FIRST AID MEASURES
  Inhalation:        Remove victim to fresh air and keep at rest in a position comfortable for breathing.    
    Get medical advice/attention if you feel unwell.
  Skin contact:        Remove/Take off immediately all contaminated clothing. Gently wash with plenty of    
    soap and water. If skin irritation or rash occurs: Get medical advice/attention.
  Eye contact:        Rinse cautiously with water for several minutes. Remove contact lenses, if present    
    and easy to do. Continue rinsing. If eye irritation persists: Get medical
    advice/attention.
  Ingestion:        Get medical advice/attention if you feel unwell. Rinse mouth.    
    A rescuer should wear personal protective equipment, such as rubber gloves and air-
  Protection of first-aiders:
    tight goggles.

Section 5. FIRE-FIGHTING MEASURES
  Suitable extinguishing        Dry chemical, foam, water spray, carbon dioxide.    
  media:
  Unsuitable extinguishing Solid streams of water
  media:
  Specific hazards arising This substance may polimerize explosively when heated or involved in a fire.
  from the chemical:        Container may explode when heated. Combat fire from a sheltered position.    
  Precautions for firefighters: Fire-extinguishing work is done from the windward and the suitable fire-extinguishing
    method according to the surrounding situation is used. Uninvolved persons should
    evacuate to a safe place. In case of fire in the surroundings: Keep containers cool by
    spraying with water. Eliminate all ignition sources if safe to do so.
  Special protective        When extinguishing fire, be sure to wear personal protective equipment.    
  equipment for firefighters:

Section 6. ACCIDENTAL RELEASE MEASURES
  Personal precautions,        Use personal protective equipment. Keep people away from and upwind of spill/leak.    
  protective equipment and Ensure adequate ventilation. Entry to non-involved personnel should be controlled
  emergency procedures: around the leakage area by roping off, etc.
  Environmental precautions: Prevent product from entering drains.
  Methods and materials for Absorb spilled material in dry sand or inert absorbent before recovering it into a
  containment and cleaning covered container. In case of large amount of spillage, contain a spill by bunding.
  up: Adhered or collected material should be promptly disposed of, in accordance with
    appropriate laws and regulations.

Section 7. HANDLING AND STORAGE
  Precautions for safe handling
  Technical measures:        Handling is performed in a well ventilated place. Wear suitable protective equipment.    
    Prevent generation of vapour or mist. Wash hands and face thoroughly after
    handling.
    Use a ventilation, local exhaust if vapour or aerosol will be generated.
  Advice on safe handling: Avoid contact with skin, eyes and clothing.
  Conditions for safe storage, including any
  incompatibilities
    Keep container tightly closed. Store in a cool and dark place.
  Storage conditions:
    Store away from incompatible materials such as oxidizing agents.
    Light-sensitive
  Packaging material:        Comply with laws.    

Section 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
  Engineering controls:        Install a closed system or local exhaust as possible so that workers should not be    
    exposed directly. Also install safety shower and eye bath.
  Personal protective equipment
  Respiratory protection: Vapor respirator. Follow local and national regulations.
    Protective gloves.
  Hand protection:
  MEHQ)

Section 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
  Eye protection:        Safety glasses. A face-shield, if the situation requires.    
  Skin and body protection: Protective clothing. Protective boots, if the situation requires.

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
  Physical state (20°C):        Liquid    
  Form:        Clear    
  Colour:        Colorless - Very pale yellow    
  Odour:        No data available    
  pH: No data available
  Melting point/freezing point:No data available
  Boiling point/range:        85°C/0.5kPa    
  Flash point:        96°C    
  Flammability or explosive
  limits:
  Lower:        No data available    
  Upper:        No data available    
  Relative density:        1.04    
  Solubility(ies):
  [Water]        No data available    
  [Other solvents]        No data available    

Section 10. STABILITY AND REACTIVITY
  Chemical stability:        Polymerization may occur under the influences of heat, light or on contact with    
    polymelization initiators such as peroxides etc.
  Possibility of hazardous No special reactivity has been reported.
  reactions:
  Conditions to avoid:        Heat, Light    
  Incompatible materials: Oxidizing agents, Reducing agents
  Hazardous decomposition Carbon monoxide, Carbon dioxide
  products:

Section 11. TOXICOLOGICAL INFORMATION
  Acute Toxicity:        No data available    
  Skin corrosion/irritation: No data available
  Serious eye        No data available    
  damage/irritation:
  Germ cell mutagenicity: No data available
  Carcinogenicity:
  IARC =        No data available    
  NTP =        No data available    
  Reproductive toxicity:        No data available    

Section 12. ECOLOGICAL INFORMATION
  Ecotoxicity:
    No data available
  Fish:
  Crustacea:        No data available    
    No data available
  Algae:
  Persistence / degradability: No data available
    No data available
  Bioaccumulative
  potential(BCF):
  Mobility in soil
  Log Pow:        No data available    
    No data available
  Soil adsorption (Koc):
  Henry's Law        No data available    
  constant(PaM3/mol):
  MEHQ)

Section 13. DISPOSAL CONSIDERATIONS
    Recycle to process, if possible. Consult your local regional authorities. You may be able to burn in a chemical
    incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local regulations when
    disposing of the substance.

Section 14. TRANSPORT INFORMATION
  Hazards Class:        Does not correspond to the classification standard of the United Nations    
    Not listed
  UN-No:

Section 15. REGULATORY INFORMATION
  Safe management ordinance of dangerous chemical product (State Council announces on January 26, 2002
  and revised on February 16,2011): Safe use and production, the storage of a dangerous chemical, transport,
    loading and unloading were prescribed.


SECTION 16 - ADDITIONAL INFORMATION
N/A

甲基丙烯酸氢糠酯 海关数据

中国海关编码:2932190090

概述:
2932190090 其他结构上有非稠合呋喃环化合物. 增值税率:17.0% 退税率:9.0% 监管条件:无 最惠国关税:6.5% 普通关税:20.0%
申报要素:
品名, 成分含量, 用途
摘要/Summary:
2932190090 other compounds containing an unfused furan ring (whether or not hydrogenated) in the structure VAT:17.0% Tax rebate rate:9.0% Supervision conditions:none MFN tariff:6.5% General tariff:20.0%

甲基丙烯酸氢糠酯 分子结构与计算化学数据

分子结构数据

1   摩尔折射率:44.62

2   摩尔体积(m3/mol):165.2

3   等张比容(90.2K):398.1

4   表面张力(dyne/cm):33.7

5 极化率(10-24cm3):17.68

计算化学数据

1.疏水参数计算参考值(XlogP):1.5

2.氢键供体数量:0

3.氢键受体数量:3

4.可旋转化学键数量:4

5.互变异构体数量:无

6.拓扑分子极性表面积35.5

7.重原子数量:12

8.表面电荷:0

9.复杂度:186

10.同位素原子数量:0

11.确定原子立构中心数量:0

12.不确定原子立构中心数量:1

13.确定化学键立构中心数量:0

14.不确定化学键立构中心数量:0

15.共价键单元数量:1

甲基丙烯酸氢糠酯 上游产品

推荐供应商更多供应商>>

湖北云镁科技有限公司

产品介绍:
产品名称:甲基丙烯酸四氢糠基酯 Cas号:2455-24-5 纯度:99% 包装信息:1kg铝箔袋/氟化瓶,10kg铝听/纸箱,25kg纸板桶/编织袋/塑料桶 价格:1.0元 - 25.0元
联系方式:
联系人:方经理 电话:027-59206672 手机:18327059871

特斯科化工(湖北)有限公司

产品介绍:
产品名称:甲基丙烯酸四氢糠基酯 Cas号:2455-24-5 纯度:99% 包装信息:1kg瓶,5kg瓶,25kg桶,200kg桶 价格:洽谈
联系方式:
联系人:郑先生 电话:18971353902 手机:18971353902

武汉卡诺斯科技有限公司

产品介绍:
产品名称:甲基丙烯酸四氢糠基酯 Cas号:2455-24-5 纯度:99% 包装信息:25千克 价格:34.0元
联系方式:
联系人:尚文 电话:153-37111468 手机:15337111468

山东西亚化学有限公司

产品介绍:
产品名称:甲基丙烯酸四氢糠基酯 Cas号:2455-24-5 纯度:97%,含 900 ppm MEHQ 稳定剂 包装信息:250g 价格:251.0元
联系方式:
联系人:崔 电话:4009903999 手机:18053972095

山东默派生物科技有限公司

产品介绍:
产品名称:甲基丙烯酸四氢糠基酯 Cas号:2455-24-5 纯度:99% 包装信息:1kg 价格:洽谈
联系方式:
联系人:张经理 电话:13070690626 手机:13070690626

湖北鑫鸣泰化学有限公司

产品介绍:
产品名称:甲基丙烯酸氢糠酯 Cas号:2455-24-5 纯度:99% 包装信息:100kg,200kg 价格:1.0元 - 1.0元
联系方式:
联系人:黄 电话:027-50662354 手机:13264726139

湖北恩星生物科技有限公司

产品介绍:
产品名称:甲基丙烯酸四氢糠基酯 Cas号:2455-24-5 纯度: 包装信息:500kg,400kg,300kg,200kg,100kg 价格:64.0元 - 100.0元
联系方式:
联系人:邵经理 电话:16621771607 手机:16621771607

宁波亿诺化学品有限公司

产品介绍:
产品名称:甲基丙烯酸氢糠酯 CAS: 2455-24-5 99%min Cas号:2455-24-5 纯度:99%min 包装信息:99%100 价格:洽谈
联系方式:
联系人:瞿 电话:0574-87314919 手机:

武汉琼格生物科技有限公司

产品介绍:
产品名称:甲基丙烯酸四氢糠基酯 Cas号:2455-24-5 纯度:97%,含 900 ppm MEHQ 稳定剂 包装信息:10g,10g,10g,10g,10g 价格:28.0元 - 28.0元
联系方式:
联系人:时燕 电话:027-84235681 手机:13657207535

云南力莲生物有限公司

产品介绍:
产品名称:甲基丙烯酸四氢糠基酯 Cas号:2455-24-5 纯度:99% 包装信息:25/桶kg 价格:30.0元
联系方式:
联系人:彭强 电话:19912838225 手机:19912830060