双吲哚马来酰亚胺 V; 1-甲基-3,4-双(1H-吲哚-3-基)马来酰亚胺

  • 基本信息
  • 物化性质
  • 安全信息
  • MSDS
  • 海关数据
  • 结构与计算化学
  • 上游产品
  • 下游产品

双吲哚马来酰亚胺 V; 1-甲基-3,4-双(1H-吲哚-3-基)马来酰亚胺 基本信息

中文名称:
双吲哚马来酰亚胺 V; 1-甲基-3,4-双(1H-吲哚-3-基)马来酰亚胺 
中文别名:
双吲哚马来酰亚胺 V;
1-甲基-3,4-双(1H-吲哚-3-基)马来酰亚胺;
双吲哚马来酰亚胺V;
双吲哚马来酰亚胺;
-甲基-3,4-双(1H-吲哚-3-基)马来酰亚胺 
英文名称:
1H-Pyrrole-2,5-dione,3,4-di-1H-indol-3-yl-1-methyl-
英文别名:
3,4-bis(1H-indol-3-yl)-1-methylpyrrole-2,5-dione;
1H-Pyrrole-2,5-dione,3,4-di-1H-indol-3-yl-1-methyl;
N-Methylbis(indol-3-yl)maleimide;
3,4-Di(1H-indol-3-yl)-1-methyl-1H-pyrrole-2,5-dione;
2,3-bis(1H-Indol-3-yl)-N-methylmaleimide;
3,4-di(1H-indol-3-yl)-1-methyl-1H-pyrrole-2,5-dione;
3,4-bis(3-indolyl)-1-methyl-pyrrole-2,5-dione;
1-Methyl-3,4-bis(3-indolyl)maleimide;
bisindolylmaleimide v;
Ro 31-6045 
CAS No.:
113963-68-1
分 子 式:
C21H15N3O2
分 子 量:
341.36
精确分子量:
341.11600
PSA:
68.96000
MDL:
MFCD00236433
InChI:
The Key: SWAWYMIKGOHZMR-UHFFFAOYSA-N
分子结构式:
SDS:
查看

双吲哚马来酰亚胺 V; 1-甲基-3,4-双(1H-吲哚-3-基)马来酰亚胺 物化性质

外观与性状:
红色固体
密度:
1.45 g/cm3
沸点:
655.7ºC at 760 mmHg
闪点:
350.3ºC
折射率:
1.794
蒸汽压:
0mmHg at 25°C
存储条件/存储方法:

常温常压下稳定,避免与强氧化剂接触。

稳定性相关:

密封储存,储存于阴凉、干燥的库房。冷藏温度为-20ºC

 

其它信息:

1.     性状:固体

2.     密度(g/mL,25):未确定3.     相对蒸汽密度(g/mL,空气=1):未确定4.     熔点(ºC):未确定5.     沸点(ºC,常压):未确定6.     沸点(ºC,10mmHg):未确定7.     折射率(n20/D):未确定8.     闪点(ºC):未确定9.     比旋光度(º):未确定10.  自燃点或引燃温度(ºC):未确定11.  蒸气压(mmHg,20ºC):未确定12.  饱和蒸气压(kPa,25ºC):未确定13.  燃烧热(KJ/mol):未确定14.  临界温度(ºC):未确定15.  临界压力(KPa):未确定16.  油水(辛醇/水)分配系数的对数值:未确定17.  爆炸上限(%,V/V):未确定18.  爆炸下限(%,V/V):未确定19.  溶解性:未确定

双吲哚马来酰亚胺 V; 1-甲基-3,4-双(1H-吲哚-3-基)马来酰亚胺 安全信息

海关代码:
2933990090
WGK_Germany:
3
德国有关水污染物质的分类清单

双吲哚马来酰亚胺 V; 1-甲基-3,4-双(1H-吲哚-3-基)马来酰亚胺 MSDS

  Material Safety Data Sheet

Section 1. Identification of the substance
    Product Name:      Bisindolylmaleimide v    
    Synonyms:

Section 2. Hazards identification
    Harmful by inhalation, in contact with skin, and if swallowed.

Section 3. Composition/information on ingredients.
    Ingredient name:        Bisindolylmaleimide v    
    CAS number:        113963-68-1    

Section 4. First aid measures
    Skin contact:        Immediately wash skin with copious amounts of water for at least 15 minutes while removing    
    contaminated clothing and shoes. If irritation persists, seek medical attention.
    Eye contact:        Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate    
    flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical
    attention.
    Inhalation:        Remove to fresh air. In severe cases or if symptoms persist, seek medical attention.    
    Ingestion:        Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention.    

Section 5. Fire fighting measures
    In the event of a fire involving this material, alone or in combination with other materials, use dry
    powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus
    should be worn.

Section 6. Accidental release measures
    Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national
    standards.
    Respiratory precaution:        Wear approved mask/respirator    
    Hand precaution:        Wear suitable gloves/gauntlets    
    Skin protection:        Wear suitable protective clothing    
    Eye protection:        Wear suitable eye protection    
    Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container
    for disposal. See section 12.
    Environmental precautions: Do not allow material to enter drains or water courses.

Section 7. Handling and storage
    Handling:        This product should be handled only by, or under the close supervision of, those properly qualified    
    in the handling and use of potentially hazardous chemicals, who should take into account the fire,
    health and chemical hazard data given on this sheet.
    Store in closed vessels.
    Storage:

Section 8. Exposure Controls / Personal protection
    Engineering Controls: Use only in a chemical fume hood.
    Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles.
    General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse.

Section 9. Physical and chemical properties
    Appearance:        Not specified    
    Boiling point:        No data    
    No data
    Melting point:
    Flash point:        No data    
    Density:        No data    
    Molecular formula:        C21H15N3O2    
    Molecular weight:        341.4    

Section 10. Stability and reactivity
    Conditions to avoid: Heat, flames and sparks.
    Materials to avoid: Oxidizing agents.
    Possible hazardous combustion products: Carbon monoxide, nitrogen oxides.

Section 11. Toxicological information
    No data.

Section 12. Ecological information
    No data.

Section 13. Disposal consideration
    Arrange disposal as special waste, by licensed disposal company, in consultation with local waste
    disposal authority, in accordance with national and regional regulations.

Section 14. Transportation information
    Non-harzardous for air and ground transportation.

Section 15. Regulatory information
    No chemicals in this material are subject to the reporting requirements of SARA Title III, Section
    302, or have known CAS numbers that exceed the threshold reporting levels established by SARA
    Title III, Section 313.


SECTION 16 - ADDITIONAL INFORMATION
N/A

双吲哚马来酰亚胺 V; 1-甲基-3,4-双(1H-吲哚-3-基)马来酰亚胺 海关数据

中国海关编码:2933990090

概述:
2933990090. 其他仅含氮杂原子的杂环化合物. 增值税率:17.0%. 退税率:13.0%. 监管条件:无. 最惠国关税:6.5%. 普通关税:20.0%
申报要素:
品名, 成分含量, 用途, 乌洛托品请注明外观, 6-己内酰胺请注明外观, 签约日期
摘要/Summary:
2933990090. heterocyclic compounds with nitrogen hetero-atom(s) only. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:20.0%

双吲哚马来酰亚胺 V; 1-甲基-3,4-双(1H-吲哚-3-基)马来酰亚胺 分子结构与计算化学数据

分子结构数据

1、摩尔折射率:100.01

2、摩尔体积(cm3/mol):235.2

3、等张比容(90.2K):697.6

4、表面张力(dyne/cm):77.2

5、介电常数:无可用的

6、极化率(10-24cm3):39.65

7、单一同位素质量:341.116427Da

8、标称质量:341Da

9、平均质量:341.3627Da

计算化学数据

1.疏水参数计算参考值(XlogP):3

2.氢键供体数量:2

3.氢键受体数量:2

4.可旋转化学键数量:2

5.互变异构体数量:3

6.拓扑分子极性表面积69

7.重原子数量:26

8.表面电荷:0

9.复杂度:604

10.同位素原子数量:0

11.确定原子立构中心数量:0

12.不确定原子立构中心数量:0

13.确定化学键立构中心数量:0

14.不确定化学键立构中心数量:0

15.共价键单元数量:1

双吲哚马来酰亚胺 V; 1-甲基-3,4-双(1H-吲哚-3-基)马来酰亚胺 上游产品

双吲哚马来酰亚胺 V; 1-甲基-3,4-双(1H-吲哚-3-基)马来酰亚胺 下游产品

推荐供应商更多供应商>>

山东默派生物科技有限公司

产品介绍:
产品名称:双吲哚马来酰亚胺 V Cas号:113963-68-1 纯度:99% 包装信息:1kg 价格:洽谈
联系方式:
联系人:谭经理 电话:13053322091 手机:13053322091

江苏从众化工股份有限公司

产品介绍:
产品名称:双吲哚马来酰亚胺 Cas号:113963-68-1 纯度:99% 包装信息:100kg 价格:100.0元
联系方式:
联系人:王 电话:13862111431 手机:13862111431

上海逐耀医药科技有限公司

产品介绍:
产品名称:双吲哚马来酰亚胺 Cas号:113963-68-1 纯度:98% 包装信息:1g 价格:洽谈
联系方式:
联系人:林 电话:02158596539 手机:18321033991

上海玉函化工有限公司

产品介绍:
产品名称:双吲哚马来酰亚胺V Cas号:113963-68-1 纯度:95% 包装信息:0.1g/1g/5g/25g/100g/500g/1000g瓶/袋 价格:洽谈
联系方式:
联系人:韩 电话:021-61469567 手机:

上海倍卓生物科技有限公司

产品介绍:
产品名称:双吲哚马来酰亚胺 V Cas号:113963-68-1 纯度: 包装信息:洽谈 价格:洽谈
联系方式:
联系人:张烁 电话:021-60548335 手机:18721011993

湖北鑫拓康楚源生物科技有限公司

产品介绍:
产品名称:双吲哚马来酰亚胺 V Cas号:113963-68-1 纯度: 包装信息:洽谈 价格:洽谈
联系方式:
联系人:方彩静 电话:027-52343735 手机:13129951824
QQ: 2241752642
微信二维码
电话: 19906633110