Section 1: Product Identification
Chemical Name: Bis(6,6,7,7,8,8,8-heptafluoro-2,2-dimethyl-3,5-octanedionate)strontium hydrate Sr(FOD)2
CAS Registry Number: 36885-30-0
Formula: Sr[C3F7COCHCOC(CH3)3]2.XH2O
EINECS Number: none
Chemical Family: metal fluorobeta-diketonate complexes
Bis(1,1,1,2,2,3,3-Heptafluoro-7,7-dimethyl-4,6-octanedionato) strontium.,
Synonym:
Heptafluorobutanoylpivaloylmethane, Strontium salt
Section 2: Composition and Information on Ingredients
Ingredient CAS Number Percent ACGIH (TWA) OSHA (PEL)
Title Compound 36885-30-0 100% no data no data
Section 3: Hazards Identification
No reports could be found indicating specific hazards associated with this material. Toxicity is probably
Emergency Overview:
minimal.
Primary Routes of Exposure: Ingestion, inhalation
Eye Contact: May cause slight to mild irritation of the eyes.
Skin Contact: May cause slight to mild irritation of the skin.
Inhalation: Dust may be irritating to the nose, mucous membranes and respiratory tract.
Ingestion: No information available on the physiological effects of ingestion.
Acute Health Affects: May be irritating to skin, eyes and respiratory tract.
Product contains fluorine which under certain conditions of use, decomposition, or metabolism, may generate
Chronic Health Affects: fluoride ion, causing, nausea, vomiting, labored breathing, hypocalcaemia, deterioration of bone and tooth
structure, kidney and liver damage.
NTP: No
IARC: No
OSHA: No
SECTION 4: First Aid Measures
Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need
Eye Exposure:
assistance in keeping their eye lids open. Get immediate medical attention.
Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if
Skin Exposure:
irritation persists.
Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty in
Inhalation:
breathing, coughing, wheezing or pain. In such cases seek immediate medical assistance.
Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce
Ingestion:
vomiting only if directed by medical personnel.
SECTION 5: Fire Fighting Measures
Flash Point: not applicable
Autoignition Temperature: none
Explosion Limits: none
Extinguishing Medium: carbon dioxide, dry powder or foam
If this product is involved in a fire, firefighters should be equipped with NIOSH approved positive pressure
Special Fire Fighting Procedures:
self-contained breathing apparatus and full protective clothing.
Hazardous Combustion and If involved in a fire this material may emit corrosive hydrogen fluoride and toxic carbonyl fluoride..
Decomposion Products:
Unusual Fire or Explosion Hazards: No unusual fire or explosion hazards.
SECTION 6: Accidental Release Measures
Spill and Leak Procedures: Small spills can be mixed with vermiculite or sodium carbonate and swept up.
SECTION 7: Handling and Storage
Handling and Storage: Store in a sealed container. Keep away from heat and moisture.
SECTION 8: Exposure Controls and Personal Protection
Eye Protection: Always wear approved safety glasses when handling a chemical substance in the laboratory.
Skin Protection: Wear appropriate chemical resistant gloves and protective clothing.
Ventilation: Material may form a fine dust. If possible, handle the material in an efficient fume hood.
If in form of fine dust and ventilation is not available a respirator should be worn. The use of respirators
Respirator:
requires a Respiratory Protection Program to be in compliance with 29 CFR 1910.134.
Ventilation: Material may form a fine dust. If possible, handle the material in an efficient fume hood.
Additional Protection: No additional protection required.
SECTION 9: Physical and Chemical Properties
Color and Form: white powder
Molecular Weight: 678
Melting Point: no data
Boiling Point: dec.250°C(subl.170°/.1mm
Vapor Pressure: subl. 100°/.1mm
Specific Gravity: no data
Odor: none
Solubility in Water: insoluble
SECTION 10: Stability and Reactivity
Stability: air and moisture stable
Hazardous Polymerization: no hazardous polymerization
Conditions to Avoid: none
Incompatibility: active metals, strong oxidizing agents.
Carbon monoxide, carbon dioxide, strontium hydroxide, hydrogen fluoride, carbonyl fluoride, and organic
Decomposition Products:
fumes.
SECTION 11: Toxicological Information
RTECS Data: No information available in the RTECS files.
Carcinogenic Effects: No data available
Mutagenic Effects: No data available
Tetratogenic Effects: No data available
SECTION 12: Ecological Information
Ecological Information: No information available.
SECTION 13: Disposal Considerations
Disposal: Dispose of according to local, state and federal regulations.
SECTION 14: Transportation
Shipping Name (CFR): Non-hazardous
Hazard Class (CFR): NA
Additional Hazard Class (CFR): NA
Packaging Group (CFR): NA
UN ID Number (CFR): NA
Shipping Name (IATA): Non-hazardous
Hazard Class (IATA): NA
Additional Hazard Class (IATA): NA
Packaging Group (IATA): NA
UN ID Number (IATA): NA
SECTION 15: Regulatory Information
TSCA: Not listed in the TSCA inventory.
SARA (Title 313): Title compound not listed.
Second Ingredient: none
SECTION 16 - ADDITIONAL INFORMATION
N/A
