2-(4-嘧啶)丙二醛

  • 基本信息
  • 物化性质
  • 安全信息
  • 毒理性
  • MSDS
  • 海关数据
  • 结构与计算化学

2-(4-嘧啶)丙二醛 基本信息

中文名称:
2-(4-嘧啶)丙二醛 
中文别名:
2-(4-嘧啶)丙二醛;
2-( 4-嘧啶)二甲醛 
英文名称:
Propanedial,2-(4-pyrimidinyl)-
英文别名:
2-pyrimidin-4-ylpropanedial;
4-Pyrimidyl-malondialdehyd;
2-(4-pyrimidinyl)malondialdehyde;
2-(pyrimidin-4-yl)propanedial;
2-(4-pyrimidyl)malondialdehyde;
2-(4-Pyrimidyl)malondialdehyde;
2-(Pyrimidin-4-yl)malonaldehyde;
2-(Pyrimidinyl-4)-malondialdehyd;
2-(4-Pyrimidinyl)-Propanedial;
2-(3,4-DIMETHOXY-PHENYL)-6-METHYL-IMIDAZO[1,2-A];
Pyrimidin-4-malonaldehyd;
4-pyrimidinyl-propanedial;
pyrimidin-4-yl-malonaldehyde 
CAS No.:
28648-78-4
分 子 式:
C7H6N2O2
分 子 量:
150.14
精确分子量:
150.04300
PSA:
59.92000
MDL:
MFCD00216530
InChI:
The Key: BQJUGEYYDDLNKB-UHFFFAOYSA-N
风险术语:
R36/37/38
安全术语:
S26S45S36/S37/S39
分子结构式:
SDS:
查看

2-(4-嘧啶)丙二醛 物化性质

外观与性状:
米色至米色-褐色粉末
密度:
1.244g/cm3
熔点:
227-232ºC
沸点:
269.9ºC at 760mmHg
闪点:
121.1ºC
折射率:
1.525
蒸汽压:
0.00705mmHg at 25°C
存储条件/存储方法:

 

 密闭于阴凉干燥环境中

稳定性相关:

 

遵照规定使用和储存则不会分解。

其它信息:

1.       性状:无可用

2.       密度(g/mL,25/4):无可用

3.       相对蒸汽密度(g/mL,空气=1):无可用

4.       熔点(ºC):227-232

5.       沸点(ºC,常压):无可用

6.       沸点(ºC,5.2kPa):无可用

7.       折射率:无可用

8.       闪点(ºC):无可用

9.       比旋光度(º):无可用

10.    自燃点或引燃温度(ºC):无可用

11.    蒸气压(kPa,25ºC):无可用

12.    饱和蒸气压(kPa,60ºC):无可用

13.    燃烧热(KJ/mol):无可用

14.    临界温度(ºC):无可用

15.    临界压力(KPa):无可用

16.    油水(辛醇/水)分配系数的对数值:无可用

17.    爆炸上限(%,V/V):无可用

18.    爆炸下限(%,V/V):无可用

19.    溶解性:无可用

2-(4-嘧啶)丙二醛 安全信息

海关代码:
2933599090
危险类别码:
R34
安全说明:
45-36/37/39-25
安全标志:
S26:万一接触眼睛,立即使用大量清水冲洗并送医诊治。
S45:出现意外或者感到不适,立刻到医生那里寻求帮助(最好带去产品容器标签)。
:
危险标志:
C: Corrosive;Xi: Irritant;

2-(4-嘧啶)丙二醛 毒理性

生态数据:

 

该物质对环境可能有危害,对水体应给予特别注意。

2-(4-嘧啶)丙二醛 MSDS

Name: 2-(4-Pyrimidyl)malondialdehyde Material Safety Data Sheet
Synonym: Non
CAS: 28648-78-4
Section 1 - Chemical Product   MSDS Name:2-(4-Pyrimidyl)malondialdehyde Material Safety Data Sheet
Synonym:Non

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
28648-78-4 2-(4-Pyrimidyl)malondialdehyde ca. 100 unlisted
Hazard Symbols: C
Risk Phrases: 34

Section 3 - HAZARDS IDENTIFICATION
  EMERGENCY OVERVIEW
Causes burns.Corrosive.The toxicological properties of this material have not been fully investigated.
Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns. May cause severe gastrointestinal tract irritation with nausea, vomiting and possible burns. The toxicological properties of this substance have not been fully investigated.
Inhalation:
Causes chemical burns to the respiratory tract.
Chronic:
Chronic inhalation and ingestion may cause effects similar to those of acute inhalation and ingestion.

Section 4 - FIRST AID MEASURES
  Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid immediately. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If breathing is difficult, give oxygen. Do NOT use mouth-to-mouth resuscitation. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Notes to Physician:
Antidote: None reported.

Section 5 - FIRE FIGHTING MEASURES
  General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, or foam.

Section 6 - ACCIDENTAL RELEASE MEASURES
  General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section. Provide ventilation.

Section 7 - HANDLING and STORAGE
  Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Do not get in eyes, on skin, or on clothing. Keep container tightly closed. Do not ingest or inhale. Use only in a chemical fume hood. Discard contaminated shoes.
Storage:
Keep container closed when not in use. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Corrosives area.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
  Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use process enclosure, local exhaust ventilation, or other engineering controls to control airborne levels.
Exposure Limits CAS# 28648-78-4: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use. Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
 
Physical State: Solid
Color: Not available.
Odor: Odorless
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 230.00 deg C dec
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: slightly soluble
Specific Gravity/Density:
Molecular Formula: C7H6N2O2
Molecular Weight: 150.14

Section 10 - STABILITY AND REACTIVITY
  Chemical Stability:
Unstable.
Conditions to Avoid:
Heating to decomposition.
Incompatibilities with Other Materials:
Acids (mineral, non-oxidizing, e.g. hydrochloric acid, hydrofluoric acid, muriatic acid, phosphoric acid), acids (mineral, oxidizing, e.g. chromic acid, hypochlorous acid, nitric acid, sulfuric acid), acids (organic, e.g. acetic acid, benzoic acid, formic acid, methanoic acid, oxalic acid), amines (aliphatic and aromatic, e.g.
dimethyl amine, propylamine, pyridine, triethylamine), azo, diazo, and hydrazines (e.g. dimethyl hydrazine, hydrazine, methyl hydrazine), caustics (e.g. ammonia, ammonium hydroxide, calcium hydroxide, potassium hydroxide, sodium hydroxide), dithiocarbamates (e.g. ferbam, maneb, metham, thiram), metals (alkali and alkaline, e.g. cesium, potassium, sodium), nitrides (e.g. potassium nitride, sodium nitride), nitro compounds (organic, e.g. nitrobenzene, nitroglycerine, picric acid, trinitrotoluene), hydrocarbons (aliphatic, unsaturated, e.g. cyclopentene, ethylene, heptene), peroxides and hydroperoxides (organic, e.g. acetyl peroxide, benzoyl peroxide, butyl peroxide, methyl ethyl ketone peroxide), sulfides (inorganic, e.g. ferric sulfide, lead sulfide, sodium sulfide), epoxides (e.g. butyl glycidyl ether), oxidizing agents (strong, e.g.
bromine, hydrogen peroxide, nitrogen dioxide, potassium nitrate), reducing agents (strong, e.g. aluminum carbide, chlorosilane, hydrogen phosphide, lithium hydride), water reactive substances (e.g. acetic anyhdride, alkyl aluminum chloride, calcium carbide, ethyl dichlorosilane).
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, carbon dioxide.
Hazardous Polymerization: May occur.

Section 11 - TOXICOLOGICAL INFORMATION
  RTECS#:
CAS# 28648-78-4 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2-(4-Pyrimidyl)malondialdehyde - Not listed by ACGIH, IARC, or NTP.

Section 12 - ECOLOGICAL INFORMATION
 

Section 13 - DISPOSAL CONSIDERATIONS
  Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION
 
IATA
Shipping Name: CORROSIVE SOLID, N.O.S.*
Hazard Class: 8
UN Number: 1759
Packing Group: III
IMO
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing group: III

Section 15 - REGULATORY INFORMATION
 
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 28648-78-4: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 28648-78-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 28648-78-4 is not listed on the TSCA inventory.
It is for research and development use only.


SECTION 16 - ADDITIONAL INFORMATION
N/A

2-(4-嘧啶)丙二醛 海关数据

中国海关编码:2933599090

概述:
2933599090. 其他结构上有嘧啶环的化合物(包括其他结构上有哌嗪环的化合物. 增值税率:17.0%. 退税率:13.0%. 监管条件:无. 最惠国关税:6.5%. 普通关税:20.0%
申报要素:
品名, 成分含量, 用途, 乌洛托品请注明外观, 6-己内酰胺请注明外观, 签约日期
摘要/Summary:
2933599090. other compounds containing a pyrimidine ring (whether or not hydrogenated) or piperazine ring in the structure. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:20.0%

2-(4-嘧啶)丙二醛 分子结构与计算化学数据

分子结构数据

1   摩尔折射率:36.99

2   摩尔体积m3/mol120.5

3   等张比容(90.2K):328.3

4   表面张力dyne/cm54.9

5   极化率10-24cm314.66

计算化学数据

1.疏水参数计算参考值(XlogP):-0.6

2.氢键供体数量:0

3.氢键受体数量:4

4.可旋转化学键数量:3

5.互变异构体数量:4

6.拓扑分子极性表面积59.9

7.重原子数量:11

8.表面电荷:0

9.复杂度:141

10.同位素原子数量:0

11.确定原子立构中心数量:0

12.不确定原子立构中心数量:0

13.确定化学键立构中心数量:0

14.不确定化学键立构中心数量:0

15.共价键单元数量:1

推荐供应商更多供应商>>

上海吉至生化科技有限公司

产品介绍:
产品名称:(Z)-3-Hydroxy-2-(pyrimidin-4-yl)acrylaldehyde Cas号:28648-78-4 纯度:- 包装信息:1gea 价格:8,518.0元
联系方式:
联系人:江珊 电话:021-57520831 手机:15316869680

雅博色彩科技(上海)有限公司

产品介绍:
产品名称:2-( 4-嘧啶)二甲醛 Cas号:28648-78-4 纯度:98%-99% 包装信息:2kg 价格:洽谈
联系方式:
联系人: 电话:021-68016328 手机: