三羰基(η-环戊二烯基)四氯化锰

  • 基本信息
  • 物化性质
  • 安全信息
  • 毒理性
  • MSDS
  • 结构与计算化学

三羰基(η-环戊二烯基)四氯化锰 基本信息

中文名称:
三羰基(η-环戊二烯基)四氯化锰 
中文别名:
三羰基(η-环戊二烯基)四氯化锰;
四氯化环戊二烯钼;
Tetrachloro(η5-2,4-cyclopentadien-1-yl)molybdenum;
环戊二烯基四氯化钼(V) 
英文名称:
cyclopentadienylmolybdenum (v) tetrachloride
英文别名:
cyclopenta-1,3-diene,tetrachloromolybdenum;
Cyclopentadienylmolybdenumtetrachloride 
CAS No.:
62927-99-5
分 子 式:
C5H5Cl4Mo
分 子 量:
302.85
精确分子量:
302.82000
PSA:
0.00000
MDL:
MFCD00269826
InChI:
The Key: MOELAHZVPBJYHP-UHFFFAOYSA-J
风险术语:
R34
安全术语:
S26;S36/37/39;
分子结构式:
SDS:
查看

三羰基(η-环戊二烯基)四氯化锰 物化性质

存储条件/存储方法:

存放在充有干爽惰性气体的容器内,并放在阴凉,干爽处。储存的地方必须上锁,钥匙必须交给技术专家和他们的助手保管。避免湿气和水分。远离氧化剂。

稳定性相关:

远离氧化物,水分/潮湿

其它信息:

1.       性状:深红色粉末。

2.       密度(g/mL,25/4):未确定

3.       相对蒸汽密度(g/mL,空气=1):未确定

4.       熔点(ºC):未确定

5.       沸点(ºC,常压):未确定

6.       沸点(ºC,5.2kPa):未确定

7.       折射率:未确定

8.       闪点(ºC):未确定

9.       比旋光度(º):未确定

10.    自燃点或引燃温度(ºC):未确定

11.    蒸气压(kPa,25ºC):未确定

12.    饱和蒸气压(kPa,60ºC):未确定

13.    燃烧热(KJ/mol):未确定

14.    临界温度(ºC):未确定

15.    临界压力(KPa):未确定

16.    油水(辛醇/水)分配系数的对数值:未确定

17.    爆炸上限(%,V/V):未确定

18.    爆炸下限(%,V/V):未确定

19.    溶解性:与水反应长生HCl。

三羰基(η-环戊二烯基)四氯化锰 安全信息

包装等级:
II
危险类别码:
34
安全说明:
S26-S36/37/39
安全标志:
S26:万一接触眼睛,立即使用大量清水冲洗并送医诊治。
:

三羰基(η-环戊二烯基)四氯化锰 毒理性

生态数据:

对水稍微有危害的,不要让未稀释或者大量产品接触地下水,水道或者污水系统。若无政府许可,勿将材料排入周围环境。

三羰基(η-环戊二烯基)四氯化锰 MSDS


Section 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE
  Product identifiers
    Product name        : Cyclopentadienylmolybdenum(V) tetrachloride    
    CAS-No.        : 62927-99-5    
  Relevant identified uses of the substance or mixture and uses advised against
    Identified uses        : Laboratory chemicals, Manufacture of substances    
  
  

Section 2. HAZARDS IDENTIFICATION
  Classification of the substance or mixture
  Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
    Skin corrosion (Category 1B)
  Classification according to EU Directives 67/548/EEC or 1999/45/EC
    Causes burns.
  Label elements
  Labelling according Regulation (EC) No 1272/2008 [CLP]
    Pictogram
    Signal word        Danger    
    Hazard statement(s)
    H314        Causes severe skin burns and eye damage.    
    Precautionary statement(s)
    P280        Wear protective gloves/ protective clothing/ eye protection/ face    
    protection.
    P305 + P351 + P338        IF IN EYES: Rinse cautiously with water for several minutes. Remove    
    contact lenses, if present and easy to do. Continue rinsing.
    P310        Immediately call a POISON CENTER or doctor/ physician.    
    Supplemental Hazard        none    
    Statements
  According to European Directive 67/548/EEC as amended.
    Hazard symbol(s)
    R-phrase(s)
    R34        Causes burns.    
    S-phrase(s)
    S26        In case of contact with eyes, rinse immediately with plenty of water and    
    seek medical advice.
    S36/37/39        Wear suitable protective clothing, gloves and eye/face protection.    
    S45        In case of accident or if you feel unwell, seek medical advice immediately    
    (show the label where possible).
  Other hazards - none

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
  Substances
    Formula        : C5H5Cl4Mo    
    Molecular Weight        : 302,85 g/mol    
    Component        Concentration    
  Cyclopentadienylmolybdenum(V) tetrachloride
    CAS-No.        62927-99-5        -    

Section 4. FIRST AID MEASURES
  Description of first aid measures
  General advice
    Consult a physician. Show this safety data sheet to the doctor in attendance.
  If inhaled
    If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
  In case of skin contact
    Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Consult a
    physician.
  In case of eye contact
    Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
  If swallowed
    Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with
    water. Consult a physician.
  Most important symptoms and effects, both acute and delayed
    To the best of our knowledge, the chemical, physical, and toxicological properties have not been
    thoroughly investigated.
  Indication of any immediate medical attention and special treatment needed
    no data available

Section 5. FIREFIGHTING MEASURES
  Extinguishing media
  Suitable extinguishing media
    Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
  Special hazards arising from the substance or mixture
    no data available
  Advice for firefighters
    Wear self contained breathing apparatus for fire fighting if necessary.
  Further information
    no data available

Section 6. ACCIDENTAL RELEASE MEASURES
  Personal precautions, protective equipment and emergency procedures
    Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure
    adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust.
  Environmental precautions
    Do not let product enter drains.
  Methods and materials for containment and cleaning up
    Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
    containers for disposal.
  Reference to other sections
    For disposal see section 13.

Section 7. HANDLING AND STORAGE
  Precautions for safe handling
    Avoid formation of dust and aerosols.
    Provide appropriate exhaust ventilation at places where dust is formed.
  Conditions for safe storage, including any incompatibilities
    Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
    Moisture sensitive.
  Specific end uses
    no data available

Section 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
  Control parameters
  Components with workplace control parameters
  Exposure controls
  Appropriate engineering controls
    Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
    at the end of workday.
  Personal protective equipment
  Eye/face protection
    Face shield and safety glasses Use equipment for eye protection tested and approved under
    appropriate government standards such as NIOSH (US) or EN 166(EU).
  Skin protection
    Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
    (without touching glove's outer surface) to avoid skin contact with this product. Dispose of
    contaminated gloves after use in accordance with applicable laws and good laboratory practices.
    Wash and dry hands.
    The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
    the standard EN 374 derived from it.
  Body Protection
    Complete suit protecting against chemicals, The type of protective equipment must be selected
    according to the concentration and amount of the dangerous substance at the specific workplace.
  Respiratory protection
    Where risk assessment shows air-purifying respirators are appropriate use a full-face particle
    respirator type N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering
    controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use
    respirators and components tested and approved under appropriate government standards such
    as NIOSH (US) or CEN (EU).

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
  Information on basic physical and chemical properties
    a) Appearance        Form: solid    
    b) Odour        no data available    
    c) Odour Threshold        no data available    
    d) pH        no data available    
    e) Melting point/freezing        Melting point/range: 245 - 249 °C - dec.    
    point
    f) Initial boiling point and no data available
    boiling range
    g) Flash point        no data available    
    h) Evaporation rate        no data available    
    i) Flammability (solid, gas) no data available
    j) Upper/lower        no data available    
    flammability or
    explosive limits
    k) Vapour pressure        no data available    
    l) Vapour density        10,46 - (Air = 1.0)    
    m) Relative density        no data available    
    n) Water solubility        no data available    
    o) Partition coefficient: n- no data available
    octanol/water
    p) Autoignition        no data available    
    temperature
    q) Decomposition        no data available    
    temperature
    r) Viscosity        no data available    
    s) Explosive properties        no data available    
    t) Oxidizing properties        no data available    
  Other safety information
    no data available

Section 10. STABILITY AND REACTIVITY
  Reactivity
    no data available
  Chemical stability
    no data available
  Possibility of hazardous reactions
    no data available
  Conditions to avoid
    no data available
  Incompatible materials
    Strong oxidizing agents
  Hazardous decomposition products
    Other decomposition products - no data available

Section 11. TOXICOLOGICAL INFORMATION
  Information on toxicological effects
  Acute toxicity
    no data available
  Skin corrosion/irritation
    no data available
  Serious eye damage/eye irritation
    no data available
  Respiratory or skin sensitization
    no data available
  Germ cell mutagenicity
    no data available
  Carcinogenicity
    IARC:        No component of this product present at levels greater than or equal to 0.1% is identified as    
    probable, possible or confirmed human carcinogen by IARC.
  Reproductive toxicity
    no data available
  Specific target organ toxicity - single exposure
    no data available
  Specific target organ toxicity - repeated exposure
    no data available
  Aspiration hazard
    no data available
  Potential health effects
  Inhalation        May be harmful if inhaled. Material is extremely destructive to the tissue of    
    the mucous membranes and upper respiratory tract.
  Ingestion        May be harmful if swallowed. Causes burns.    
  Skin        May be harmful if absorbed through skin. Causes skin burns.    
  Eyes        Causes eye burns.    
  Signs and Symptoms of Exposure
    To the best of our knowledge, the chemical, physical, and toxicological properties have not been
    thoroughly investigated.
  Additional Information
    RTECS: Not available

Section 12. ECOLOGICAL INFORMATION
  Toxicity
    no data available
  Persistence and degradability
    no data available
  Bioaccumulative potential
    no data available
  Mobility in soil
    no data available
  Results of PBT and vPvB assessment
    no data available
  Other adverse effects
    no data available

Section 13. DISPOSAL CONSIDERATIONS
  Waste treatment methods
  Product
    Offer surplus and non-recyclable solutions to a licensed disposal company. Dissolve or mix the material
    with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
  Contaminated packaging
    Dispose of as unused product.

Section 14. TRANSPORT INFORMATION
  UN number
    ADR/RID: 3261        IMDG: 3261        IATA: 3261    
  UN proper shipping name
    ADR/RID: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S. (Cyclopentadienylmolybdenum(V)
    tetrachloride)
    IMDG: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S. (Cyclopentadienylmolybdenum(V)
    tetrachloride)
    IATA:        Corrosive solid, acidic, organic, n.o.s. (Cyclopentadienylmolybdenum(V) tetrachloride)    
  Transport hazard class(es)
    ADR/RID: 8        IMDG: 8        IATA: 8    
  Packaging group
    ADR/RID: II        IMDG: II        IATA: II    
  Environmental hazards
    ADR/RID: no        IMDG Marine pollutant: no        IATA: no    
  Special precautions for user
    no data available



SECTION 15 - REGULATORY INFORMATION
N/A


SECTION 16 - ADDITIONAL INFORMATION
N/A

三羰基(η-环戊二烯基)四氯化锰 分子结构与计算化学数据

计算化学数据

1.疏水参数计算参考值(XlogP):无

2.氢键供体数量:0

3.氢键受体数量:1

4.可旋转化学键数量:0

5.互变异构体数量:无

6.拓扑分子极性表面积0

7.重原子数量:10

8.表面电荷:-1

9.复杂度:129

10.同位素原子数量:0

11.确定原子立构中心数量:0

12.不确定原子立构中心数量:0

13.确定化学键立构中心数量:0

14.不确定化学键立构中心数量:0

15.共价键单元数量:2

推荐供应商更多供应商>>

湖北万得化工有限公司

产品介绍:
产品名称:三羰基(η-环戊二烯基)四氯化锰 Cas号:62927-99-5 纯度:99% 包装信息:1kg铝箔袋/氟化瓶,10kg铝听/纸箱,25kg纸板桶/编织袋/塑料桶,200kg镀锌铁桶/塑料桶,1t吨袋 价格:1.0元 - 1,000.0元
联系方式:
联系人:库薇 电话:027-59210159 手机:15172311821

湖北巨胜科技有限公司

产品介绍:
产品名称:三羰基(η-环戊二烯基)四氯化锰 Cas号:62927-99-5 纯度:99% 包装信息:25kg纸板桶/编织袋/塑料桶 价格:25.0元
联系方式:
联系人:孙敏 电话:027-59599240 手机:18702754003

湖北广奥生物科技有限公司

产品介绍:
产品名称:三羰基(η-环戊二烯基)四氯化锰 Cas号:62927-99-5 纯度:99% 包装信息:1kg铝箔袋/氟化瓶,10kg铝听/纸箱,25kg纸板桶/编织袋/塑料桶,200kg镀锌铁桶/塑料桶,1t吨袋 价格:1.0元 - 1,000.0元
联系方式:
联系人:李经理 电话:027-59223056 手机:15271829679

湖北信康医药化工有限公司

产品介绍:
产品名称:三羰基(η-环戊二烯基)四氯化锰 Cas号:62927-99-5 纯度:99% 包装信息:25kg纸板桶/编织袋/塑料桶 价格:25.0元
联系方式:
联系人:张欢 电话:027-59308705 手机:18827031272

湖北摆渡化学有限公司

产品介绍:
产品名称:环戊二烯四氯化钼 Cas号:62927-99-5 纯度:99% 包装信息:25kg 价格:1.0元
联系方式:
联系人:陈经理 电话:027-59223020 手机:18871490324

阿法埃莎(天津)化学有限公司

产品介绍:
产品名称:三羰基(η-环戊二烯基)四氯化锰 Cas号:62927-99-5 纯度: 包装信息:洽谈 价格:洽谈
联系方式:
联系人:张海滨 电话:800-810-6000 手机: