Version 1.0
Regulation (EC) No 1907/2006
1 - Product and Company Information
Product Name ETHYL P-TOLYL SULFIDE - 50 MG
2 - Hazards Identification
SPECIAL INDICATION OF HAZARDS TO HUMANS AND THE ENVIRONMENT
Not hazardous according to Directive 67/548/EEC.
3 - Composition/Information on Ingredients
Product Name CAS # EC no Annex I
Index Number
ETHYL P-TOLYL SULFIDE 622-63-9 None None
Formula C9H12S
Molecular Weight 152,2600 AMU
4 - First Aid Measures
AFTER INHALATION
If inhaled, remove to fresh air. If not breathing give
artificial respiration. If breathing is difficult, give oxygen.
AFTER SKIN CONTACT
In case of contact, immediately wash skin with soap and copious
amounts of water.
AFTER EYE CONTACT
In case of contact, immediately flush eyes with copious amounts
of water for at least 15 minutes.
AFTER INGESTION
If swallowed, wash out mouth with water provided person is
conscious. Call a physician.
5 - Fire Fighting Measures
EXTINGUISHING MEDIA
Suitable: For small (incipient) fires, use media such as
ALDRICH www.molbase.com
"alcohol" foam, dry chemical, or carbon dioxide. For large
fires, apply water from as far as possible. Use very large
quantities (flooding) of water applied as a mist or spray; solid
streams of water may be ineffective. Cool all affected
containers with flooding quantities of water.
SPECIAL RISKS
Specific Hazard(s): Combustible liquid. Emits toxic fumes under
fire conditions.
SPECIAL PROTECTIVE EQUIPMENT FOR FIREFIGHTERS
Wear self-contained breathing apparatus and protective clothing
to prevent contact with skin and eyes.
6 - Accidental Release Measures
PERSONAL PRECAUTION PROCEDURES TO BE FOLLOWED IN CASE OF LEAK OR SPILL
Evacuate area.
PROCEDURE(S) OF PERSONAL PRECAUTION(S)
Wear respirator, chemical safety goggles, rubber boots, and
heavy rubber gloves.
METHODS FOR CLEANING UP
Cover with dry-lime, sand, or soda ash. Place in covered
containers using non-sparking tools and transport outdoors.
Ventilate area and wash spill site after material pickup is
complete.
7 - Handling and Storage
HANDLING
Directions for Safe Handling: Avoid breathing vapor. Avoid
contact with eyes, skin, and clothing. Avoid prolonged or
repeated exposure.
STORAGE
Conditions of Storage: Keep tightly closed. Keep away from heat
and open flame.
SPECIAL REQUIREMENTS: Stench.
8 - Exposure Controls / Personal Protection
ENGINEERING CONTROLS
Safety shower and eye bath. Mechanical exhaust required.
GENERAL HYGIENE MEASURES
Wash contaminated clothing before reuse. Wash thoroughly after
handling.
PERSONAL PROTECTIVE EQUIPMENT
Respiratory Protection: Use respirators and components tested and
approved under appropriate government standards such as NIOSH (US)
or CEN (EU). Where risk assessment shows air-purifying respirators
are appropriate use a full-face respirator with multi-purpose
combination (US) or type ABEK (EN 14387) respirator cartridges as
a backup to engineering controls. If the respirator is the sole
means of protection, use a full-face supplied air respirator.
Hand Protection: Compatible chemical-resistant gloves.
ALDRICH www.molbase.com
Eye Protection: Chemical safety goggles.
9 - Physical and Chemical Properties
Appearance Physical State: Liquid
Odor: Stench.
Property Value At Temperature or Pressure
pH N/A
BP/BP Range N/A
MP/MP Range N/A
Flash Point 76,700. - 87,800 °C.
Flammability N/A
Autoignition Temp N/A
Oxidizing Properties N/A
Explosive Properties N/A
Explosion Limits N/A
Vapor Pressure N/A
Partition Coefficient Log Kow: 3,748
Viscosity N/A
Vapor Density N/A
Saturated Vapor Conc. N/A
Evaporation Rate N/A
Bulk Density N/A
Decomposition Temp. N/A
Solvent Content N/A
Water Content N/A
Surface Tension N/A
Conductivity N/A
Miscellaneous Data N/A
Solubility N/A
10 - Stability and Reactivity
STABILITY
Stable: Stable.
Materials to Avoid: Strong oxidizing agents.
HAZARDOUS DECOMPOSITION PRODUCTS
Hazardous Decomposition Products: Carbon monoxide, Carbon dioxide,
Sulfur oxides.
HAZARDOUS POLYMERIZATION
Hazardous Polymerization: Will not occur
11 - Toxicological Information
SIGNS AND SYMPTOMS OF EXPOSURE
To the best of our knowledge, the chemical, physical, and
toxicological properties have not been thoroughly investigated.
ROUTE OF EXPOSURE
Skin Contact: May cause skin irritation.
Skin Absorption: May be harmful if absorbed through the skin.
Eye Contact: May cause eye irritation.
Inhalation: May be harmful if inhaled. Material may be
irritating to mucous membranes and upper respiratory tract.
Ingestion: May be harmful if swallowed.
ALDRICH www.molbase.com
12 - Ecological Information
No data available.
13 - Disposal Considerations
SUBSTANCE DISPOSAL
Contact a licensed professional waste disposal service to dispose
of this material. This combustible material may be burned in a
chemical incinerator equipped with an afterburner and scrubber.
Observe all federal, state, and local environmental regulations.
14 - Transport Information
RID/ADR
Non-hazardous for road transport.
IMDG
Non-hazardous for sea transport.
IATA
UN#: 3334
Class: 9
Proper Shipping Name: Aviation Regulated Liquid, N.O.S.
Inhalation Packing Group I: No
Technical Name: Required
15 - Regulatory Information
Not hazardous according to Directive 67/548/EEC.
Caution: Substance not yet fully tested (EU).
16 - Other Information
WARRANTY
The above information is believed to be correct but does not
purport to be all inclusive and shall be used only as a guide. The
information in this document is based on the present state of our
knowledge and is applicable to the product with regard to
appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Inc.,
shall not be held liable for any damage resulting from handling or
from contact with the above product. See reverse side of invoice
or packing slip for additional terms and conditions of sale.
Copyright 2010 Co. License granted to make
unlimitedpaper copies for internal use only.
DISCLAIMER
For R&D use only. Not for drug, household or other uses.
ALDRICH www.molbase.com
SECTION 16 - ADDITIONAL INFORMATION
N/A
