2,2,2-氘代溴乙烷

  • 基本信息
  • 物化性质
  • 安全信息
  • MSDS
  • 结构与计算化学
  • 上游产品
  • 下游产品

2,2,2-氘代溴乙烷 基本信息

中文名称:
2,2,2-氘代溴乙烷 
中文别名:
2,2,2-氘代溴乙烷;
溴乙烷-2,2,2-d3;
乙基溴-2,2,2-d3 
英文名称:
Ethane-1,1,1-d3,2-bromo- (7CI,8CI,9CI)
英文别名:
2-bromo-1,1,1-trideuterioethane;
Ethyl-2,2,2-d3 bromide;
2,2,2-(2)H3-ethyl bromide;
2-bromo-1,1,1-trideuterio-ethane;
2,2,2-[D3]ethyl bromide;
Bromoethane-2,2,2-d3;
D3-ethylbromide 
CAS No.:
7439-86-3
分 子 式:
C2H2BrD3
分 子 量:
111.98
精确分子量:
110.97600
PSA:
0.00000
MDL:
MFCD00143875
InChI:
The Key: RDHPKYGYEGBMSE-FIBGUPNXSA-N
风险术语:
R11R45R20/21/22R36/37/38
安全术语:
S16S26S45S53S36/S37/S39
分子结构式:
SDS:
查看

2,2,2-氘代溴乙烷 物化性质

密度:
1.500 g/mL at 25ºC
熔点:
-119ºC(lit.)
沸点:
37-40ºC(lit.)
闪点:
-10 °F
折射率:
n20/D 1.4235(lit.)
存储条件/存储方法:

密闭,阴凉干燥处保存

稳定性相关:

避免强氧化剂,强碱,镁

避免光,明火,高温

其它信息:

1.       性状:未确定

2.       密度(g/mL at 25°C1.500

3.       相对蒸汽密度(g/mL,空气=1):未确定

4.       熔点(ºC):-199

5.       沸点(ºC,常压):37-40

6.       沸点(ºC,0.1mmHg):未确定

7.       折射率(n20/D):1.424

8.       闪点(ºC):未确定

9.       比旋光度(º):未确定

10.    自燃点或引燃温度(ºC):未确定

11.    蒸气压(mmHg,37ºC):未确定

12.    饱和蒸气压(kPa,114.4 ºC):未确定

13.    燃烧热(KJ/mol):未确定

14.    临界温度(ºC):未确定

15.    临界压力(MPa):未确定

16.    油水(辛醇/水)分配系数的对数值:未确定

17.    爆炸上限(%,V/V):未确定

18.    爆炸下限(%,V/V):未确定

19.    溶解性:未确定

2,2,2-氘代溴乙烷 安全信息

危险类别码:
R45
安全说明:
S16-S26-S45-S53-S36-S37-S39
安全标志:
S16:远离火源。
S26:万一接触眼睛,立即使用大量清水冲洗并送医诊治。
S45:出现意外或者感到不适,立刻到医生那里寻求帮助(最好带去产品容器标签)。
S53:避免暴露——使用前先阅读专门的说明。
:
危险标志:
F,T

2,2,2-氘代溴乙烷 MSDS


Section 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE
  Product identifiers
    Product name        : Bromoethane-2,2,2-d3    
    CAS-No.        : 7439-86-3    
  Relevant identified uses of the substance or mixture and uses advised against
    Identified uses        : Laboratory chemicals, Manufacture of substances    
  
  

Section 2. HAZARDS IDENTIFICATION
  Classification of the substance or mixture
  Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
    Flammable liquids (Category 2)
    Carcinogenicity (Category 2)
    Acute toxicity, Inhalation (Category 4)
    Acute toxicity, Oral (Category 4)
  Classification according to EU Directives 67/548/EEC or 1999/45/EC
    Highly flammable. Limited evidence of a carcinogenic effect. Harmful by inhalation and if swallowed.
  Label elements
  Labelling according Regulation (EC) No 1272/2008 [CLP]
    Pictogram
    Signal word        Danger    
    Hazard statement(s)
    H225        Highly flammable liquid and vapour.    
    H302        Harmful if swallowed.    
    H332        Harmful if inhaled.    
    H351        Suspected of causing cancer.    
    Precautionary statement(s)
    P210        Keep away from heat/sparks/open flames/hot surfaces. - No smoking.    
    P281        Use personal protective equipment as required.    
    Supplemental Hazard        none    
    Statements
  According to European Directive 67/548/EEC as amended.
    Hazard symbol(s)
    R-phrase(s)
    R11        Highly flammable.    
    R20/22        Harmful by inhalation and if swallowed.    
    R40        Limited evidence of a carcinogenic effect.    
    S-phrase(s)
    S36/37        Wear suitable protective clothing and gloves.    
  Other hazards - none

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
  Substances
    Synonyms        : Ethyl-2,2,2-d3 bromide    
    Ethyl-2,2,2-d3 bromide
    Formula        : C2D3H2Br    
    Molecular Weight        : 111,98 g/mol    
    Component        Concentration    
  Bromoethane-2,2,2-d3
    CAS-No.        7439-86-3        -    

Section 4. FIRST AID MEASURES
  Description of first aid measures
  General advice
    Consult a physician. Show this safety data sheet to the doctor in attendance.
  If inhaled
    If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
  In case of skin contact
    Wash off with soap and plenty of water. Consult a physician.
  In case of eye contact
    Flush eyes with water as a precaution.
  If swallowed
    Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with
    water. Consult a physician.
  Most important symptoms and effects, both acute and delayed
    prolonged or repeated exposure can cause:, Nausea, Dizziness, Headache, narcosis
  Indication of any immediate medical attention and special treatment needed
    no data available

Section 5. FIREFIGHTING MEASURES
  Extinguishing media
  Suitable extinguishing media
    Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
  Special hazards arising from the substance or mixture
    Carbon oxides, Hydrogen bromide gas
  Advice for firefighters
    Wear self contained breathing apparatus for fire fighting if necessary.
  Further information
    Use water spray to cool unopened containers.

Section 6. ACCIDENTAL RELEASE MEASURES
  Personal precautions, protective equipment and emergency procedures
    Use personal protective equipment. Avoid breathing vapors, mist or gas. Ensure adequate ventilation.
    Remove all sources of ignition. Evacuate personnel to safe areas. Beware of vapours accumulating to
    form explosive concentrations. Vapours can accumulate in low areas.
  Environmental precautions
    Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
  Methods and materials for containment and cleaning up
    Contain spillage, and then collect with an electrically protected vacuum cleaner or by wet-brushing and
    place in container for disposal according to local regulations (see section 13).
  Reference to other sections
    For disposal see section 13.

Section 7. HANDLING AND STORAGE
  Precautions for safe handling
    Avoid contact with skin and eyes. Avoid inhalation of vapour or mist.
    Keep away from sources of ignition - No smoking.Take measures to prevent the build up of electrostatic
    charge.
  Conditions for safe storage, including any incompatibilities
    Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are
    opened must be carefully resealed and kept upright to prevent leakage.
    Store under inert gas. hygroscopic
  Specific end uses
    no data available

Section 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
  Control parameters
  Components with workplace control parameters
  Exposure controls
  Appropriate engineering controls
    Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
    at the end of workday.
  Personal protective equipment
  Eye/face protection
    Face shield and safety glasses Use equipment for eye protection tested and approved under
    appropriate government standards such as NIOSH (US) or EN 166(EU).
  Skin protection
    Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
    (without touching glove's outer surface) to avoid skin contact with this product. Dispose of
    contaminated gloves after use in accordance with applicable laws and good laboratory practices.
    Wash and dry hands.
    The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
    the standard EN 374 derived from it.
  Body Protection
    Complete suit protecting against chemicals, Flame retardant antistatic protective clothing, The type
    of protective equipment must be selected according to the concentration and amount of the
    dangerous substance at the specific workplace.
  Respiratory protection
    Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator
    with multi-purpose combination (US) or type AXBEK (EN 14387) respirator cartridges as a backup
    to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air
    respirator. Use respirators and components tested and approved under appropriate government
    standards such as NIOSH (US) or CEN (EU).

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
  Information on basic physical and chemical properties
    a) Appearance        Form: liquid    
    b) Odour        no data available    
    c) Odour Threshold        no data available    
    d) pH        no data available    
    e) Melting point/freezing        Melting point/range: -119 °C - lit.    
    point
    f) Initial boiling point and 37 - 40 °C - lit.
    boiling range
    g) Flash point        no data available    
    h) Evaporation rate        no data available    
    i) Flammability (solid, gas) no data available
    j) Upper/lower        no data available    
    flammability or
    explosive limits
    k) Vapour pressure        no data available    
    l) Vapour density        no data available    
    m) Relative density        1,500 g/mL at 25 °C1,500 g/cm3 at 25 °C    
    n) Water solubility        no data available    
    o) Partition coefficient: n- no data available
    octanol/water
    p) Autoignition        no data available    
    temperature
    q) Decomposition        no data available    
    temperature
    r) Viscosity        no data available    
    s) Explosive properties        no data available    
    t) Oxidizing properties        no data available    
  Other safety information
    no data available

Section 10. STABILITY AND REACTIVITY
  Reactivity
    no data available
  Chemical stability
    no data available
  Possibility of hazardous reactions
    no data available
  Conditions to avoid
    Heat, flames and sparks. Extremes of temperature and direct sunlight.
  Incompatible materials
    Strong oxidizing agents
  Hazardous decomposition products
    Other decomposition products - no data available

Section 11. TOXICOLOGICAL INFORMATION
  Information on toxicological effects
  Acute toxicity
    no data available
  Skin corrosion/irritation
    no data available
  Serious eye damage/eye irritation
    no data available
  Respiratory or skin sensitization
    no data available
  Germ cell mutagenicity
    no data available
  Carcinogenicity
    Limited evidence of carcinogenicity in animal studies
    IARC:        3 - Group 3: Not classifiable as to its carcinogenicity to humans (Bromoethane-2,2,2-d3)    
  Reproductive toxicity
    no data available
  Specific target organ toxicity - single exposure
    no data available
  Specific target organ toxicity - repeated exposure
    no data available
  Aspiration hazard
  Potential health effects
  Inhalation        Harmful if inhaled. May cause respiratory tract irritation.    
  Ingestion        Harmful if swallowed.    
  Skin        May be harmful if absorbed through skin. May cause skin irritation.    
  Eyes        May cause eye irritation.    
  Signs and Symptoms of Exposure
    prolonged or repeated exposure can cause:, Nausea, Dizziness, Headache, narcosis
  Additional Information
    RTECS: Not available

Section 12. ECOLOGICAL INFORMATION
  Toxicity
    no data available
  Persistence and degradability
    no data available
  Bioaccumulative potential
    no data available
  Mobility in soil
    no data available
  Results of PBT and vPvB assessment
    no data available
  Other adverse effects
    no data available

Section 13. DISPOSAL CONSIDERATIONS
  Waste treatment methods
  Product
    Burn in a chemical incinerator equipped with an afterburner and scrubber but exert extra care in igniting
    as this material is highly flammable. Offer surplus and non-recyclable solutions to a licensed disposal
    company.
  Contaminated packaging
    Dispose of as unused product.

Section 14. TRANSPORT INFORMATION
  UN number
    ADR/RID: 1891        IMDG: 1891        IATA: 1891    
  UN proper shipping name
    ADR/RID: ETHYL BROMIDE (Bromoethane-2,2,2-d3)
    IMDG: ETHYL BROMIDE (Bromoethane-2,2,2-d3)
    IATA:        Ethyl bromide (Bromoethane-2,2,2-d3)    
  Transport hazard class(es)
    ADR/RID: 6.1        IMDG: 6.1        IATA: 6.1    
  Packaging group
    ADR/RID: II        IMDG: II        IATA: II    
  Environmental hazards
    ADR/RID: no        IMDG Marine pollutant: no        IATA: no    
  Special precautions for user
    no data available



SECTION 15 - REGULATORY INFORMATION
N/A


SECTION 16 - ADDITIONAL INFORMATION
N/A

2,2,2-氘代溴乙烷 分子结构与计算化学数据

分子结构数据

五、分子性质数据:

1、   摩尔折射率:19.04

2、   摩尔体积(m3/mol):74.7

3、   等张比容(90.2K):163.8

4、   表面张力(dyne/cm):23.1

5、   极化率10-24cm3):7.55

计算化学数据

1.疏水参数计算参考值(XlogP):1.4

2.氢键供体数量:0

3.氢键受体数量:0

4.可旋转化学键数量:0

5.互变异构体数量:无

6.拓扑分子极性表面积0

7.重原子数量:3

8.表面电荷:0

9.复杂度:2.8

10.同位素原子数量:3

11.确定原子立构中心数量:0

12.不确定原子立构中心数量:0

13.确定化学键立构中心数量:0

14.不确定化学键立构中心数量:0

15.共价键单元数量:1

2,2,2-氘代溴乙烷 上游产品

2,2,2-氘代溴乙烷 下游产品

推荐供应商更多供应商>>

上海吉至生化科技有限公司

产品介绍:
产品名称:Bromoethane-d3 Cas号:7439-86-3 纯度:99% atom D 包装信息:5gea 价格:4,908.0元
联系方式:
联系人:江珊 电话:021-57520831 手机:15316869680