双(2-乙氧基乙基)癸二酸酯

  • 基本信息
  • 物化性质
  • 安全信息
  • MSDS
  • 海关数据
  • 结构与计算化学
  • 上游产品

双(2-乙氧基乙基)癸二酸酯 基本信息

中文名称:
双(2-乙氧基乙基)癸二酸酯 
中文别名:
双(2-乙氧基乙基)癸二酸酯;
Decanedioicacid,bis(2-ethoxyethyl)ester Di-(ethoxyethyl) sebacate Sebacic acid, bis(2-ethoxyethyl) ester Bis(2-ethoxyethyl) sebacate Di-(2-ethoxyethyl)sebacate Bis(2-ethoxyethyl) decanedioate 
英文名称:
Decanedioic acid,1,10-bis(2-ethoxyethyl) ester
英文别名:
bis(2-ethoxyethyl) decanedioate;
|A-ethoxyethyl sebacate;
Bis-(2-ethoxy-ethyl)-sebacat;
AC1L2KVP;
AC1Q68B5;
Decanedioic acid,bis(2-ethoxyethyl) ester;
Bis(2-ethoxyethyl) sebacate;
Decandisaeure-bis-(2-aethoxy-aethylester);
Sebacic acid,bis(2-ethoxyethyl) ester 
CAS No.:
624-10-2
分 子 式:
C18H34O6
分 子 量:
346.46
精确分子量:
346.23600
PSA:
71.06000
MDL:
MFCD00041927
EINECS:
210-829-1
InChI:
The Key: UVRXDBUBNLXONB-UHFFFAOYSA-N
风险术语:
R36
安全术语:
S26S39
分子结构式:
SDS:
查看

双(2-乙氧基乙基)癸二酸酯 物化性质

密度:
1.003g/cm3
熔点:
-1ºC
沸点:
407.1ºC at 760 mmHg
闪点:
172.6ºC
折射率:
1.444-1.446
存储条件/存储方法:

密封储存,储存于阴凉、干燥的库房。

稳定性相关:

常温常压下稳定,避免与不相容材料,强氧化剂接触。

双(2-乙氧基乙基)癸二酸酯 安全信息

海关代码:
2918990090
危险类别码:
36
安全说明:
39-26
安全标志:
S26:万一接触眼睛,立即使用大量清水冲洗并送医诊治。
S39:佩戴眼/面防护装置。
危险标志:
Xi

双(2-乙氧基乙基)癸二酸酯 MSDS

Name: Bis(2-Ethoxyethyl) Sebacate 93% (GC) Material Safety Data Sheet
Synonym: None known
CAS: 624-10-2
Section 1 - Chemical Product   MSDS Name:Bis(2-Ethoxyethyl) Sebacate 93% (GC) Material Safety Data Sheet
Synonym:None known

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
624-10-2 Bis(2-Ethoxyethyl) Sebacate 93 210-829-1
Hazard Symbols: XI
Risk Phrases: 36

Section 3 - HAZARDS IDENTIFICATION
  EMERGENCY OVERVIEW
Irritating to eyes.The toxicological properties of this material have not been fully investigated.
Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis.
Skin:
May cause skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and diarrhea. The toxicological properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated.
Chronic:
No information found.

Section 4 - FIRST AID MEASURES
  Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

Section 5 - FIRE FIGHTING MEASURES
  General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Vapors may be heavier than air. They can spread along the ground and collect in low or confined areas. Containers may explode when heated.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Cool containers with flooding quantities of water until well after fire is out. Use water spray, dry chemical, carbon dioxide, or appropriate foam.

Section 6 - ACCIDENTAL RELEASE MEASURES
  General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, observing precautions in the Protective Equipment section. Remove all sources of ignition. Provide ventilation.

Section 7 - HANDLING and STORAGE
  Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Keep away from heat, sparks and flame. Avoid ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
  Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 624-10-2: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
 
Physical State: Liquid
Color: colorless
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: -1 deg C
Autoignition Temperature: Not applicable.
Flash Point: > 93 deg C (> 199.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C18H34O6
Molecular Weight: 346.45

Section 10 - STABILITY AND REACTIVITY
  Chemical Stability:
Stable at room temperature in closed containers under normal storage and handling conditions.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.

Section 11 - TOXICOLOGICAL INFORMATION
  RTECS#:
CAS# 624-10-2 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Bis(2-Ethoxyethyl) Sebacate - Not listed by ACGIH, IARC, or NTP.

Section 12 - ECOLOGICAL INFORMATION
 

Section 13 - DISPOSAL CONSIDERATIONS
  Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION
 
IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

Section 15 - REGULATORY INFORMATION
 
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36 Irritating to eyes.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 39 Wear eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 624-10-2: No information available.
Canada
CAS# 624-10-2 is listed on Canada's NDSL List.
CAS# 624-10-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 624-10-2 is listed on the TSCA inventory.


SECTION 16 - ADDITIONAL INFORMATION
N/A

双(2-乙氧基乙基)癸二酸酯 海关数据

中国海关编码:2918990090

概述:
2918990090. 其他含其他附加含氧基羧酸(包括酸酐、酰卤化物、过氧化物和过氧酸及该税号的衍生物). 增值税率:17.0%. 退税率:13.0%. 监管条件:无. 最惠国关税:6.5%. 普通关税:30.0%
申报要素:
品名, 成分含量, 用途
摘要/Summary:
2918990090. other carboxylic acids with additional oxygen function and their anhydrides, halides, peroxides and peroxyacids; their halogenated, sulphonated, nitrated or nitrosated derivatives. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:30.0%

双(2-乙氧基乙基)癸二酸酯 分子结构与计算化学数据

计算化学数据

1.疏水参数计算参考值(XlogP):3.2

2.氢键供体数量:0

3.氢键受体数量:6

4.可旋转化学键数量:19

5.互变异构体数量:无

6.拓扑分子极性表面积71.1

7.重原子数量:24

8.表面电荷:0

9.复杂度:276

10.同位素原子数量:0

11.确定原子立构中心数量:0

12.不确定原子立构中心数量:0

13.确定化学键立构中心数量:0

14.不确定化学键立构中心数量:0

15.共价键单元数量:1

双(2-乙氧基乙基)癸二酸酯 上游产品

推荐供应商更多供应商>>

QQ: 2241752642
微信二维码
电话: 19906633110